STC SA00751SE

Number SA00751SE This certificate, issued to French Aviation, Inc.

P. O. Box 878 Wolf Point, NT 59201 certifies that the change in the type design for th e following product with the limitations and conditions therefor as specified hereon meets the airworthine ss requirements of Part 21 of the Federal Aviation Regulations.

Original ProductType Certificate Number: A9SW (AT-301) A17SW (AT401, AT401B) Make: Air Tractor Model: AT 301, AT-401, AT-401B

Description of the Type Design Change: Installation of Cold Air Induction System in accordance with French Aviation, Inc., Master Drawing List FAI-1001, Revision IR, dated June 29, 1999, or later FAA-approved revision.

Limitations and Conditions: Approval of this change in type design applies to the above model aircraft only.

This approval should not be extended to other aircraft of this model on which other previously approved modifications are incorporated unless it is determined that the relationship between this change and any other previously approved modifications, including changes in type design, will introduce no adverse effect upon the airworthiness of that aircraft. A copy of this Certificate must be maintained as part of the permanent records for the modified aircraft.

If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.

This certificate and the supporting data which is the ba sis for approval shall remain in effect until surrendered, suspended, revoked, or a termination date is otherwise established by the Administrator of the Federal Aviation Administration.

Date of application: March 31, 1999 Date reissued:

Date of issuance: November 5, 1999 Date amended:

(Signature) Acting Manager, Seattle Aircraft Certification Office (Title)