STC SA00763AT

Supplemental type certificate · FFC Manufacturing

Holder
FFC Manufacturing · United States
Status
Current · Reissued
Status date
April 29, 2009
Applied
September 9, 1994
Product
Aircraft · Small Multi-Engine
Certification basis
Part 21

From FAA DRS, with our copy of the certificate PDF. DRS record last changed December 6, 2025.

What it approves

Installation of left hand and right hand fuel cell assemblies. (310 S/N PO240 and up, 401 S/N 1 thru B1200, 402 S/N 1 thru B1200)

What the certificate says

From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.

This certificate issued to

Part * of the Regulations.

Description of Type Design Change: Installation of left and right side fuel cell assemblies in accordance with A/C Fuel Cells Worldwide, Inc., “Installation Instructions,” dated August 30 1994; A/C Fuel Cells Worldwide, Inc., Drawing C3803, Revision A dated July 19, 1998 (was Drawing C3803-1, No Revision, dated December 13, 1994) and Drawing C3804, Revision A, dated July 19, 1998 (was drawing C3804-1, No Revision, dated December 13, 1994); or FAA approved revision.

Limitations and Conditions: This approval should not be extended to other aircraft of these models on which other previously approved modifications are incorporated unless it is determined by the installer that the interrelationship between this change and any of those other previously approved modifications will introduce no adverse effects upon the airworthiness of the aircraft. If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.

(See continuation 3 of 3)

FFC Manufacturing 4010 Pilot Dr., Suite 103 Memphis, TN 38118 (See continuation 3 of 3) Make: Cessna Model: (See continuation 3of 3) Date reissued: July 31, 2002; April 29, 2009

Date amended: December 30, 1998

( Signature) Melvin D. Taylor Manager Atlanta Aircraft Certification Office

( Title)

Date of application: September 09, 1994

Date of issuance: May 01, 1995

FAA FORM 8110-2-1(10-69) PAGE 2 of 3 PAGES

Number SA00763AT

FAA FORM 8110-2-1(10-69) PAGE 3 of 3 PAGES

Number SA00763AT

Model Continuation:

Cessna A/W RQMT’S

310 S/N P0240 and UP TCDS No. 3A10, Rev. 59 CAR 3 340 S/N All TCDS No. 3A025, Rev. 25 CAR 3/ FAR 23 401 S/N 1 thru B1200 TCDS No. A7CE, Rev. 38 CAR 3 402 S/N 1 thru B1200 TCDS No. A7CE, Rev. 38 CAR 3 414 S/N All TCDS No. A7CE, Rev. 38 CAR 3

Limitations and Conditions: (Continuation)

FFC Manufacturing part numbers C3803-1 (left hand, assembly) and C3804-1 (right hand assembly) are replacements for Cessna part numbers 9910023-3 (left hand assembly) and 9910023-4 (right hand assembly), for the listed model aircrafts.

ADs that name this STC · 0

An AD can apply because an STC is installed, or mention one in its text.

No AD in this release names this STC

Approved models · 5

MakeModelData sheet
Cessna Aircraft Company3103A10
Cessna Aircraft Company3403A25
Cessna Aircraft Company401A7CE
Cessna Aircraft Company402A7CE
Cessna Aircraft Company414A7CE