STC SA00816SE

Supplemental type certificate · Mitsubishi Heavy Industries America Inc

Holder
Mitsubishi Heavy Industries America Inc · United States
Status
Current · Amended
Status date
July 5, 2013
Applied
May 4, 2000
Product
Aircraft · Small Airplane
Certification basis
Part 21

From FAA DRS, with our copy of the certificate PDF. DRS record last changed December 6, 2025.

What it approves

Installation of emergency exit placards

What the certificate says

From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.

United States of America Department of Transportation - Federal Aviation Administration Supplemental Type Certificate Number SA00816SE

This certificate, issued to Mitsubishi Heavy Industries America, Inc.

4951 Airport Parkway, Suite 530 Addison, TX 75001-6045

Part * of the * Regulations.

Original ProductType Certificate Number: * See attached Federal Aviation Administration (FAA) Make: Approved Model List (AML) SA00816SE for approved Model: aircraft models and applicable airworthiness regulations

Description of the Type Design Change: Installation of emergency exit placards in accordance with the Master Drawing List as specified on AML SA00816SE, and Installation Instructions Document as specified on AML SA00816SE.

Limitations and Conditions: Approval of this change in type design applies to the Mitsubishi aircraft models listed on AML SA00816SE only. This approval should not be extended to other aircraft of these models on which other previously approved modifications are incorporated unless it is determined by the installer that the relationship between this change and any of those other previously approved modifications, including changes in type design, will introduce no adverse effect upon the airworthiness of that aircraft.

A copy of this certificate and AML must be maintained as part of the permanent records for the modified aircraft.

If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.

Date of application: May 4, 2000 Date reissued:

Date of issuance: June 14, 2000 Date amended: July 5, 2013

(Signature)

Manager, Seattle Aircraft Certification Office (Title)

ADs that name this STC · 0

An AD can apply because an STC is installed, or mention one in its text.

No AD in this release names this STC

Approved models · 17

MakeModelData sheet
Mitsubishi Heavy Industries Ltd.MU-2BA2PC
Mitsubishi Heavy Industries Ltd.MU-2B-10A2PC
Mitsubishi Heavy Industries Ltd.MU-2B-15A2PC
See all 17 models

Every issue · 2

DRS keeps each issue of an STC as its own record, with its own certificate and attachments.

DateStatusFiles
July 5, 2013Amended, currentCertificateApproved model list
June 14, 2000Issued, earlier issueCertificate