STC SA00831SE

Supplemental type certificate · Micro AeroDynamics Inc

Holder
Micro AeroDynamics Inc · United States
Status
Current · Issued
Status date
August 4, 2000
Applied
May 3, 2000
Product
Aircraft · Single-Engine
Certification basis
Part 21

From FAA DRS, with our copy of the certificate PDF. DRS record last changed December 6, 2025.

What it approves

Installation of vortex generators on wings and tail surfaces.

What the certificate says

From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.

Number SA00831SE This certificate, issued to Micro AeroDynamics, Inc.

4000 Airport Road, Suite D Anacortes, WA 98221 Part * of the * Regulations.

Original ProductType Certificate Number: *See attached FAA Approved Model List (AML) Make: No. SA00831SE for a list of approved airplane Model: models and applicable airworthiness regulations.

Description of the Type Design Change: Installation of vortex generators on the wings and tail surfaces in accordance with the provisions of AML SA00831SE.

NOTE: If more than five vortex generators are damaged or missing, the aircraft is not airworthy.

Limitations and Conditions: Approval of this change in type design applies to the aircraft listed on AML SA00831SE only. This approval should not be extended to other aircraft on which other previously approved modifications are incorporated unless it is determined that the relationship between this change and any other previously approved modifications, including changes in type design, will introduce no adverse effect upon the airworthiness of that aircraft. A copy of this Certificate and AML must be maintained as part of the permanent records for the modified aircraft.

If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.

This certificate and the supporting data which is the ba sis for approval shall remain in effect until surrendered, suspended, revoked, or a termination date is otherwise established by the Administrator of the Federal Aviation Administration.

Date of application: May 3, 2000 Date reissued:

Date of issuance: August 4, 2000 Date amended:

(Signature) Acting Manager, Seattle Aircraft Certification Office (Title)

ADs that name this STC · 0

An AD can apply because an STC is installed, or mention one in its text.

No AD in this release names this STC

Approved models · 32

MakeModelData sheet
Cessna Aircraft Company172A3A12
Cessna Aircraft Company172B3A12
Cessna Aircraft Company172C3A12
See all 32 models

Every issue · 1

DRS keeps each issue of an STC as its own record, with its own certificate and attachments.

DateStatusFiles
August 4, 2000Issued, currentCertificateApproved model list