STC SA00845DE

Supplemental type certificate · Bighorn Airways Inc

Holder
Bighorn Airways Inc · United States
Status
Current · Issued
Status date
April 15, 2017
Applied
November 21, 2016
Product
Aircraft · Small/Large Airplane
Certification basis
Part 21, Part 23
Data sheet
TCDSA16EU

From FAA DRS, with our copy of the certificate PDF. DRS record last changed December 6, 2025.

What it approves

Installation of two Ferno Advanced Life Support Litters (ALSL) with equipment mounts and medical electrical power

What the certificate says

From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.

United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate Number: SA00845DE

This certificate and the supporting data which is the bases for approval shall remain in effect until surrendered, suspended, revoked, or a termination date is otherwise established by the Administrator of the Federal Aviation Administration.

Date of Application: November 21, 2016 Date Reissued:

Date of Issuance: April 15, 2017 Date Amended:

Signature Title Kreg R. Voorhies ODA Administrator, Cert Works ODA(AIR)-833887-NM

FAA Form 8110-2 (5/14) Page 1 of 3

This certificate, issued to: Bighorn Airways 912 Brundage Lane Sheridan, WY 82801

Part 23 of the Federal Aviation Regulations.

Original Product - Type Certificate Number: A16EU Make: RUAG Aerospace Services GmbH Model: Dornier 228-202

Description of the Type Design Change:

Installation of two Ferno Advanced Life Support Litters (ALSL) with equipment mounts and medical electrical power in accordance with Document No. CW0602-1005, Master Drawing List, Do 228-202 Medical Interior Modifications, Revision A dated 4/8/2017, FAA approved 4/15/2017 or later FAA approved revision.

Instructions for Continued Airworthiness (ICA), Document No. CW0725-1007, Revision IR dated 4/1/2017, FAA Accepted 4/15/2017, or later FAA accepted revision are required to be made available at installation.

FAA Approved Airplane Flight Manual Supplement, Document No. CW0715-1057, Revision IR dated 2/3/2017, FAA Approved 4/15/2017, or later FAA approved revision is required for this modification.

1. The installer must determine whether this design change is compatible with previously approved modifications.

2. If the holder agrees to permit another person to use this certificate to alter a product, the holder must give the other person written evidence of that permission.

(Certification Basis on page 3 of 3)

FAA Form 8110-2 (5/14) Page 2 of 3

Transfer the ownership of Supplemental Type Certificate Number: SA00845DE

To (Name and address of transferee)

From (Name and address of grantor)

United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate (Continuation Sheet) Number: SA00845DE

Date of Issuance: April 15, 2017

FAA Form 8110-2 (5/14) Page 3 of 3

Certification Basis:

Based on 14 CFR §§ 21.115 and 21.101, and the FAA policy for significant changes in FAA Order 8110.48, the certification basis for the RUAG Aerospace Services GmbH Dornier 228-202 Ferno ALSL, equipment mounts, and electrical inverter installation is as follows:

a. The type certification basis for RUAG Aerospace Services GmbH Dornier 228-202 airplane is shown on TCDS A16EU for parts not changed or not affected by the change.

b. The certification basis for parts changed or affected by the change since the reference date of application, November 21, 2016, is based upon 14 CFR Part 23, effective February 1, 1965 plus Amendments 23-1 through 23-23, as defined per the TCDS. Based on 14 CFR §§ 21.115 and 21.101, and the FAA policy for significant changes in FAA Order 8110.48, the certification basis for this modification was determined to be:

Regulations at the TCDS Certification Basis (Part 23, Amendments 23-1 through 23-23):

14 CFR Sections: 23.301 Amdt. - ; 23.303 Amdt. - ; 23.305 Amdt. - ; 23.307(a) Amdt. - ; 23.337(a,b) Amdt. 23-7; 23.341 Amdt. 23-7; 23.561(a,b,e) Amdt. 23-7; 23.601 Amdt. - ; 23.603 Amdt. 23-23;

23.605(a) Amdt. 23-23; 23.607 Amdt. 23-17; 23.609 Amdt. - ; 23.611 Amdt. 23-7; 23.613 Amdt. 23- 23; 23.619 Amdt. 23-7; 23.625 Amdt. 23-7; 23.783(a) Amdt. - ; 23.785(g,i,j,l) Amdt. 23-23;

23.785(a,b,e,f) Amdt. 23-23; 23.807(a)(1),(b)(1) Amdt. 23-10; 23.853(a) Amdt. 23-23; 23.1301 Amdt.

23-20; 23.1309(a),(b) Amdt. 23-17; 23.1351(a),(b)(1)(i, ii,iii) Amdt. 23-20; 23.1357(a,c) Amdt. 23- 20; 23.1365(a),(b) Amdt. 23-14; 23.1413(a,b) Amdt. 23-22; 23.1413(c) Amdt. 23-22; 23.1529(a,c,d,h) Amdt. 23-8; 23.1541(a,b) Amdt. 23-21; 23.1581(a,b,d) Amdt. 23-21; 23.1585(a) Amdt. 23-21;

23.1589 Amdt. 23-13

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - END- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

ADs that name this STC · 0

An AD can apply because an STC is installed, or mention one in its text.

No AD in this release names this STC

Approved models · 1

MakeModelData sheet
RUAG Aerospace Services GmbHDornier 228-202A16EU