What it approves
Installation of replacement fuel cell assemblies
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
This certificate issued to
Part * of the Regulations.
Description of Type Design Change: Installation of replacement fuel cell assemblies according to FFC Manufacturing Composite Drawing B-240-1(-2)(-3) dated April 14, 1995 and FFC Manufacturing Drawing B-2530-9-1(2), B-2657-3-1(-2), dated April 14, 1995 or later FAA approved revision.
Limitations and Conditions: This approval should not be extended to other aircraft of these models on which other previously approved modifications are incorporated unless it is determined by the installer that the interrelationship between this change and any of those other previously approved modifications will introduce no adverse effects upon the airworthiness of the aircraft. If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.
(See continuation 3 of 3)
FFC Manufacturing 4010 Pilot Dr., Suite 103 Memphis, TN 38118 A23CE Make: Beech Model: (See continuation 3 of 3) Date reissued: May 01, 2009
( Signature) Melvin D. Taylor Manager Atlanta Aircraft Certification Office
( Title)
Date of application: September 20, 1995
Date of issuance: October 13, 1995
FAA FORM 8110-2-1(10-69) PAGE 2 of 3 PAGES
Number SA00864AT-D
FAA FORM 8110-2-1(10-69) PAGE 3 of 3 PAGES
Number SA00864AT-D
Model Continuation:
FFC Manufacturing replacement part numbers 2530-9 (-10) are eligible for installation on Beech 58P and 58TC models serial series TJ-3 through TJ-90 and TK-1 through TK-23. FFC Manufacturing replacement part numbers 2657-3(-4) are eligible for installation on Beech 58P and 58TC models serial series TJ-91 and after and TK-24 and after.
Limitations and Conditions – Continued:
FFC Manufacturing part numbers 2530-9(-10) will be replacement s for Beech part numbers 58- 380030-9(-10). FFC Manufacturing part number 2657-3(-4) will be replacements for Beech part numbers 60-921057-3(-4).
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.