What it approves
Installation of replacement fuel cell assemblies
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
This certificate issued to
Part * of the Regulations.
Description of Type Design Change: Installation of replacement fuel cell assemblies according to FFC Manufacturing Drawing B-2100-5, Rev. A dated May 27, 1998 or later FAA approved revision.
Limitations and Conditions: This approval should not be extended to other aircraft of these models on which other previously approved modifications are incorporated unless it is determined by the installer that the interrelationship between this change and any of those other previously approved modifications will introduce no adverse effects upon the airworthiness of the aircraft. If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.
(See continuation 3 of 3)
FFC Manufacturing 4010 Pilot Dr., Suite 103 Memphis, TN 38118 A14CE Make: Beech Model: (See continuation 3 of 3) Date reissued: May 01, 2009
( Signature) Melvin D. Taylor Manager Atlanta Aircraft Certification Office
( Title)
Date of application: September 20, 1995
Date of issuance: October 13, 1995
FAA FORM 8110-2-1(10-69) PAGE 2 of 3 PAGES
Number SA00866AT-D
FAA FORM 8110-2-1(10-69) PAGE 3 of 3 PAGES
Number SA00866AT-D
Model Continuation:
FFC Manufacturing replacement part numbers 2552-11(-12) are eligible for installation on specific Beech models. FFC Manufacturing replacement part numbers 2100-5(-6) are eligible for installation on specific Beech models 100, A100, B100 and B90 models. FFC replacement part numbers 2100- 9(-10) are eligible for installation on Beech 100, A100 and B100 models .
Limitations and Conditions – Continued:
FFC Manufacturing part numbers 2552-11(-12) will be replacements for Beech part numbers 50- 921552-11(-12). FFC Manufacturing part number 2100-5(-6) will be replacements for Beech part numbers 100-381000-5(-6). FFC Manufacturing part numbers 2100-13(-14) will be replacements for Beech part numbers 100-381000-13(-14). FFC Manufacturing part number 2100-9 will be replacements for Beech part numbers 100-381000-9(-10).
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.