STC SA00867AT-D

This certificate issued to

Part * of the Regulations.

Description of Type Design Change: Installation of replacement fuel cell assemblies according to FFC Manufacturing Composite Drawings B-240-1 (-2) (-3) dated April 14, 1995 and Drawing B-2100-5 (-1)(-2) dated April 14, 1995 or later FAA approved revision.

Limitations and Conditions: This approval should not be extended to other aircraft of these models on which other previously approved modifications are incorporated unless it is determined by the installer that the interrelationship between this change and any of those other previously approved modifications will introduce no adverse effects upon the airworthiness of the aircraft. If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.

(See continuation 3 of 3)

FFC Manufacturing 4010 Pilot Dr., Suite 103 Memphis, TN 38118 A31CE Make: Beech Model: (See continuation 3 of 3) Date reissued: May 01, 2009

( Signature) Melvin D. Taylor Manager Atlanta Aircraft Certification Office

( Title)

Date of application: September 20, 1995

Date of issuance: October 13, 1995

FAA FORM 8110-2-1(10-69) PAGE 2 of 3 PAGES

Number SA00867AT-D

FAA FORM 8110-2-1(10-69) PAGE 3 of 3 PAGES

Number SA00867AT-D

Model Continuation:

FFC Manufacturing replacement part numbers 2100-5(-6) are eligible for installation on Beech F90 models serial series LA-2 through LA-225. . FFC Manufacturing replacement part numbers 2100- 13(-14) are eligible for installation on Beech F90 models serial series LA-226 and after.

Limitations and Conditions – Continued:

FFC Manufacturing part numbers 2100-5(-6) will be replacements for Beech part numbers 100- 381000-5(-6). FFC Manufacturing part numbers 2100-13(-14) will be replacements for Beech part numbers 100-381000-13(-14).