STC SA00908NY

United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate IMPORT Number: SA00908NY Maple Leaf Aviation Ltd.

This certificate issued to: Group 520, Box 16, RR5 Brandon, Manitoba Part 23 of the Federal Aviation Regulations.

Original Product - Type Certificate Number: Make: *See attached FAA Approved Model List (AML) **See attached FAA Approved Model List (AML) Model: *See attached FAA Approved Model List (AML) No. SA00908NY for a list of approved models and applicable airworthiness regulations.

1. Installation of Fiberglass Stabilator Tips in accordance with Maple Leaf Aviation Ltd. Master Drawing List Report No.

177-0960200, dated December 10, 1997, TCCA approved on July 24, 1998, or later TCCA approved revision as listed on the

2. Installation of Upper and Lower Fiberglass Tail Cone sections in accordance with Maple Leaf Aviation Ltd. Modification Data Approved Model List (AML) Number SA00908NY.

Summary Report No. MLA1013-MDS, Rev. NI, dated February 3, 2011, TCCA approved on April 12, 2011, or later TCCA approved revision as listed on the Approved Model List (AML) Number SA00908NY.

Description of Type Design Change: Continued on Page 3 of 3) Limitations and Conditions: 1. The installer must determine whether this design change is compatible with previously approved modifications.

2. If the holder agrees to permit another person to use this certificate to alter a product, the holder must give the other person written evidence of that permission.

Limitations and Conditions: Continued on Page 3 of 3)

Date of Application: July 30, 1998 Date Reissued:

Date of Issuance: November 6, 1998 Date Amended: December 13, 2018 By Direction of the Administrator Anthony E. Gallo Manager, New York ACO Branch transferred or made available to third persons by licensing agreements in accordance with 14 CFR 21.47. Possession of this Supplemental Type This certificate may be Certificate (STC) document by persons other than the STC holder does not constitute rights to the design data nor to alter an aircraft, aircraft engine, or propeller.

Page 1 of 3 FAA Form 8110-2 (5/14)

United States of America Department of Transportation Federal Aviation Administration TINISTRA Supplemental Type Certificate

Transfer Endorsement Transfer the ownership of Supplemental Type Certificate Number: SA00908NY To (Name and address of transferee) From (Name and address of grantor) Extent of Authority (if licensing agreement):

This certificate may be transterred or made available to third persons by licensing agreements in accordance with 14 CFR 21.47. The ST's supporting documentation (drawings, instructions, specifications, flight manual supplements, etc.) is the property of the STC holder.

FAA Form 8110-2 (5/14) Page 2 of 3

United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate (Continuation Sheet) Number: SA00908NY Date Amended: December 13, 2018 Description of Type Design Change: (continued):

3. Maintenance of the Upper and Lower Fiberglass Tail Cone sections must be in accordance with TCCA accepted Maple Leaf Aviation Ltd. Instructions for Continued Airworthiness MLA 1013-ICA, Rev. NI, dated February 03, 2011, or later TCCA accepted revision as listed on the Approved Model List (AML) Number SA00908NY.

Limitations and Conditions: (continued):

Certification Basis:

Based on 14 CFR §$ 21.115 and 21.101, and the FAA policy for significant changes in FAA Order 8110.48, the certification basis for the modified Textron 177, 177A, 177B series models and Textron 177RG is as follows:

(a) For parts not changed or not affected by the change: The existing type certification basis for the aircraft models as shown on the respective FAA Type Certificate Data Sheets: A13CE and A20CE.

(b) For parts changed or affected by the change: As specified in the Approved Model List (AML) Number SA00908NY.

------END-----

FAA Form 8110-2 (5/14) Page 3 of 3