STC SA00932SE

FAA Form 8110-2 (11/20) SUPERSEDES PREVIOUS EDITION Page 1 of ___ United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate Number:

SA00932SE Steve Pierce 196 US Hwy 380 East Graham, TX 76450 Part * the * Regulations * * See attached FAA Approved Model List (AML) No. SA00932SE for a list of the approved airplane models and applicable airworthiness regulations.

Installation of the Stewart wing tip assembly in accordance with Stewart Wing Tip Assembly Master Drawing List SWT 3001, dated April 8, 2001, or later FAA approved revision.

Approval of this change in type design applies to the aircraft models listed on the AML only. This approval should not be extended to other aircraft of these models on which other previously approved modifications are incorporated unless it is determined that the relationship between this change and any of those other previously approved modifications, including changes in type design, will introduce no adverse effect upon the airworthiness of that aircraft. A copy of this Certificate and AML must be maintained as part of the permanent records for the modified aircraft.

If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.

January 16, 1999 March 17, 2021 June 21, 2001 For Acting Manager, Seattle ACO Branch 2

FAA Form 8110-2 (11/20) SUPERSEDES PREVIOUS EDITION Page 2 of ___ United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate Number:

SA00932SE 2