STC SA01016SE

Number SA01016SE

This certificate, issued to Wings Aloft, Inc.

8467 Perimeter Road S.

Seattle, WA 98108 Part 23 of the Federal Aviation Regulations.

Original ProductType Certificate Number: A00009CH Make: Cirrus Design Corporation Model: SR20

Description of the Type Design Change: Installation of an engine control lever friction bolt retainer.

Manufactured in accordance with Manufacturing Drawing List #1, Revision 0, dated October 22, 2001, or later FAA approved revision. Installed and maintained in accordance with in accordance with Installation Data List #1, Revision 0, dated October 22, 2001.

Limitations and Conditions: Approval of this change in type design applies to the model aircraft listed above only. This approval should not be extended to aircraft of these models on which other previously approved modifications are incorporated unless it is determined by the installer that the relationship between this change and any of those other previously approved modifications, including changes in type design, will introduce no adverse effect upon the airworthiness of that aircraft. A copy of this Certificate must be maintained as part of the permanent records for the modified aircraft.

This certificate and the supporting data which is the ba sis for approval shall remain in effect until surrendered, suspended, revoked, or a termination date is otherwise established by the Administrator of the Federal Aviation Administration.

Date of application: June 14, 2001 Date reissued:

Date of issuance: November 14, 2001 Date amended:

(Signature) Acting Manager, Seattle Aircraft Certification Office (Title)