What it approves
Installation of fuel cell assemblies.
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
This certificate issued to
Part 3 of the Civil Air Regulations.
Installation of fuel cell assemblies on DEHavilland DHC-6 model aircrafts in accordance with A/C Fuel Cells Worldwide, Inc., “Installation Instructions,” dated August 30, 1994; and A/C Fuel Cells Worldwide, Inc., Drawing No. DHC-6, Revision 0, dated November 15, 1995; or later FAA approved revision.
Limitations and Conditions: This approval should not be extended to other aircraft of these models on which other previously approved modifications are incorporated unless it is determined by the installer that the interrelationship between this change and any of those other previously approved modifications will introduce no adverse effects upon the airworthiness of the aircraft. If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.
(See continuation 3 of 3)
FFC Manufacturing 4010 Pilot Dr., Suite 103 Memphis, TN 38118 A9EA Make: DeHavilland Aircraft Co.
Model: DHC-6, All Date reissued: July 29, 2002; April 29, 2009
( Signature) Melvin D. Taylor Manager Atlanta Aircraft Certification Office
( Title)
Date of application: February 15, 1996
Date of issuance: June 19, 1996
FAA FORM 8110-2-1(10-69) PAGE 2 of 3 PAGES
Number SA01060AT
FAA FORM 8110-2-1(10-69) PAGE 3 of 3 PAGES
Number SA01060AT
Model Airworthiness Requirements: CAR 3
This approval covers eight fuel cells with distinctive part numbers for the DHC-6 aircraft model. The only difference between the following part numbers is the width and nipple locations:
P/N AC-1051 P/N AC-1052 P/N AC-1053 P/N AC-1054 P/N AC-1055 P/N AC-1056 P/N AC-1057 P/N AC-1058
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.