STC SA01140WI

Supplemental type certificate · Garmin International Inc

Holder
Garmin International Inc · United States
Status
Current · Issued
Status date
February 27, 2003
Applied
May 31, 2002
Product
Aircraft · Single-Engine
Certification basis
Part 21, Part 23
Data sheet
TCDS3A13

From FAA DRS, with our copy of the certificate PDF. DRS record last changed December 5, 2025.

What it approves

Installation of a Garmin GNS 430/530 VHF NAV/COMM/GPS System and associated GI 106A Course Deviation Indicators (CDI), GTX 327 ATCRBS Transponder, and GMA 340 Audio Panel. Data Required: (1) Garmin Master Drawing List (MDL) 005-C0001-00, Revision E, dated February 18, 2003; and (2) FAA Approved Airplane Flight Manual Supplement (AFMS), for Cessna Models 182S, 182T, and T182T with Garmin GNS 430 and GNS 530 VHF NAV/COMM/GPS and GI 106A Course Deviation Indicators, Garmin Document, Revision B, dated February 26, 2003; or later FAA Approved Revisions to (1) or (2).

What the certificate says

From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.

Number SA01140WI This certificate issued to Garmin International, Inc.

1200 East 151st Street Olathe, KS 66062

Part 23 of the Federal Aviation Regulations.

Original Product--Type Certificate Number : 3A13 Make : Cessna Model : 182S; 182T; T182T

Description of Type Design Change: Installation of a Garmin GNS 430/530 VHF NAV/COMM/GPS System and associated GI 106A Course Deviation Indicators (CDI), GTX 327 ATCRBS Transponder, and GMA 340 Audio Panel. Data Required: (1) Garmin Master Drawing List (MDL) 005-C0001-00, Revision E, dated February 18, 2003; and (2) FAA Approved Airplane Flight Manual Supplement (AFMS), for Cessna Models 182S, 182T, and T182T with Garmin GNS 430 and GNS 530 VHF NAV/COMM/GPS and GI 106A Course Deviation Indicators, Garmin Document, Revision B, dated February 26, 2003; or later FAA Approved Revisions to (1) or (2).

Limitations and Conditions : Compatibility of this design change with previously approved modifications must be determined by the installer. If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.

Date of application : May 31, 2002

Date of issuance : February 27, 2003 Date reissued :

( Signature) Harvey E. Nero FAA Program Manager Wichita Aircraft Certification Office

(Title)

ADs that name this STC · 0

An AD can apply because an STC is installed, or mention one in its text.

No AD in this release names this STC

Approved models · 3

MakeModelData sheet
The Cessna Aircraft Company182S3A13
The Cessna Aircraft Company182T3A13
The Cessna Aircraft CompanyT182T3A13