What it approves
Installation of Electronics International Model FP-5 or FP-5L fuel flow/fuel pressure instrument as a replacement instrument.
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
Number SA01157LA
This certificate, issued to Electronics International, Inc.
63296 Powell Butte Hwy.
Bend, OR 97701
Part * of the * Regulations.
Original ProductType Certificate Number: * See attached FAA Approved Model List (AML) Make: No. SA01157LA for a list of approved aircraft Model: models and applicable airworthiness TCDS
Description of the Type Design Change: Installation of Electronics International Model FP-5 or FP-5L Fuel Flow/Fuel Pressure Instrument as a replacement instrument in accordance with document II SO506931 revisions listed on the attached AML No. SA01157LA, or later FAA approved revision.
Limitations and Conditions: The installation should not be incorporated in any aircraft unless it is determined that the interrelationship between this installation and any previously approved configuration will not introduce any adverse effect upon the airworthiness of the aircraft. The approval of this modification applies to the above noted airplane model series only. A copy of this STC, the AML, and Airplane Flight Manual Supplement, AFM2112, Rev. B, or later FAA approved revision must be included in the permanent records of the modified aircraft. If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.
Date of application: September 11, 2000 Date reissued: December 3, 2001, January 20, 2005 Date of issuance: June 1, 2001 Date amended: January 20, 2005
(Signature)
Acting Manager, Seattle Aircraft Certification Office (Title)
Number SA01157LA
Electronics International, Inc.
Reissued: December 3, 2001, January 20, 2005 Amended: January 20, 2005
Limitations and Conditions: (cont’d)
In locations where this STC removes an existing combination manifold pressure (MAP)/fuel flow instrument, an FAA approved MAP gage must be installed in the aircraft with the FP-5 or FP-5L fuel flow/fuel pressure instrument installed by this STC.
This instrument must not be the primary source of information for determining the fuel quantity on board.
The instrument fuel pressure limits must be programmed at the factory and may not be pilot programmable.
- END -
FAA FORM 8110-2- 1 (10-69)
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.
Approved models · 593
Every issue · 1
DRS keeps each issue of an STC as its own record, with its own certificate and attachments.
| Date | Status | Files |
|---|---|---|
| January 20, 2005 | Reissued, current | CertificateApproved model list |