What it approves
Installation of a Semi-Portable Oxygen System.
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
Number SA01232SE This certificate, issued to Precise Flight Inc.
63354 Powell Butte Road Bend, OR 97701 Part 23 of the Federal Aviation Regulations.
Original Product⎯Type Certificate Number: A00009CH Make: Cirrus Design Corporation Model: SR20, SR22
Description of the Type Design Change: Installation of a Semi-Portable Oxygen System Manufactured in accordance with Precise Flight Engineering Drawing Lists 003N0000, Revision H, dated April 8, 2007; 009N0000, Revision B, dated June 12, 2006; 010N0000, Revision H, dated March 8, 2006; 011N0000, Revision A, dated April 8, 2007;
012N0000, Revision -, dated May 20, 2005; 015N0000, Revision G, dated August 4, 2006; 020N0000, Revision F, dated February 27, 2006; 025N0000, Revision C, dated January 3, 2006; 026N0000, Revision D, dated February 16, 2007; and 027N0000, Revision D, dated April 9, 2007, or later FAA Approved Revisions. Installed in accordance with Precise Flight Engineering Drawing List 003N0000, Revision H, or later FAA approved revisions. Maintained in accordance with the Instructions for Continued Airworthiness located in the Airplane Flight Manual Supplement (AFMS), Precise Flight Document 003NMAN0001, Section 9, Revision A, dated April 26, 2007, or later FAA approved revision.
Limitations and Conditions: Approval of this change in type design applies to the above model aircraft only. This approval should not be extended to other aircraft of these models on which other previously approved modifications are incorporated unless it is determined that the relationship between this change and any of those other previously approved modifications, including changes in type design, will introduce no adverse effect upon the airworthiness of that aircraft. A copy of this Certificate and FAA approved AFMS, Precise Flight, Inc. Document 003NMAN0001, Revision A, dated April 26, 2007, or later FAA approved revisions, must be maintained as part of the permanent records for the modified aircraft. This STC permits the maximum operating altitude of the SR20 and SR22 to be changed to 17,500 feet as depicted in the type certificate data sheet.
If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.
This certificate and the supporting data which is the ba sis for approval shall remain in effect until surrendered, suspended, revoked, or a termination date is otherwise established by the Administrator of the Federal Aviation Administration.
Date of application: July 6, 2002 Date reissued:
Date of issuance: June 27, 2003 Date amended: July 18, 2003; November 7, 2003, May 7, 2007
Original signed by Mike Pasion_ (Signature) Acting Manager, Seattle Aircraft Certification Office (Title)
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.