What it approves
Installation of left-hand and right-hand box section fuel cell assemblies.
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
This certificate issued to
Part 23 of the Federal Aviation Regulations.
Description of Type Design Change: Installation of left hand and right hand box section fuel cell assemblies in accordance with FFC Manufacturing Master document List, Engineering Report 01-2810-027, or later FAA approved revision.
(See continuation 3 of 3)
Limitations and Conditions: This approval should not be extended to other aircraft of these models on which other previously approved modifications are incorporated unless it is determined by the installer that the interrelationship between this change and any of those other previously approved modifications will introduce no adverse effects upon the airworthiness of the aircraft. If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.
FFC Manufacturing 4010 Pilot Dr., Suite 103 Memphis, TN 38118 A26CE Make: Beech Craft Model: T-34C Date reissued: July 31, 2002; April 29, 2009
Date amended: October 01, 2002
( Signature) Melvin D. Taylor Manager Atlanta Aircraft Certification Office
( Title)
Date of application: November 22, 1996
Date of issuance: February 03, 1997
FAA FORM 8110-2-1(10-69) PAGE 2 of 3 PAGES
Number SA01258AT-D
FAA FORM 8110-2-1(10-69) PAGE 3 of 3 PAGES
Number SA01258AT-D
Model Airworthiness Requirements: FAR 23
Description of Type Design Change – Continued:
Left Hand Box Section Fuel Cell – P/N B6103-1
Right Hand Box Section Fuel Cell – P/N B6104-1
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.
Approved models · 1
| Make | Model | Data sheet |
|---|---|---|
| Hawker Beechcraft Corporation | T-34C | A26CE |