What it approves
Installation of OCEM AP-3C autopilot.
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
FAA Form 8110-2(10-68) Page 1 of 1 Number SA01303AT This Certificate issued to Chelton Aviation Corporation 5011 Sabre Drive Denton, TX 76207
Part 3 of the Civil Air Regulations.
Original Product Type Certificate Number : 1A10 Make : The New Piper Aircraft, Inc.
Model : PA-23, PA-160, PA-235, PA-250, PA-E23-250
Description of Type Design Change: Installation of Chelton Aviation Corp AP-3C autopilot in accordance with Master Drawing List No. SA01303AT-12, Revision A, dated September 26, 2005, or later FAA approved revision.
FAA approved Airplane Flight Manual Supplement SA01303AT-14, dated October 4, 2005, or later FAA approved revision is required.
Limitations and Conditions: Compatibility of this design change with previously approved modifications must be determined by the installer. If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.
Date of application : November 5, 1996
Date of issuance : March 17, 1997 Date reissued : April 6, 2004
Date amended : November 16, 2005, Rev. 1
( Signature) S. Frances Cox Manager, Special Certification Office Southwest Region
(Title)
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.
Approved models · 5
Every issue · 2
DRS keeps each issue of an STC as its own record, with its own certificate and attachments.
| Date | Status | Files |
|---|---|---|
| November 16, 2005 | Amended, current | Certificate |
| April 6, 2004 | Reissued, earlier issue | Certificate |