STC SA01335AT-D

Part 3 of the Civil Air Regulations.

Description of Type Design Change: Installation of replacement fuel cell assemblies according to FFC Engineering Report 01-2810-037 Rev. B, dated June 25, 2010 or later FAA Approved Revisions.

Limitations and Conditions: This approval should not be extended to other aircraft of this model on which other previously approved modifications are incorporated, unless it is determined by the installer that the interrelationship between this change and any other previously approved modifications will produce no adverse effect upon the airworthiness of that airplane. If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.

(See continuation 3 of 3)

(Signature)

Melvin D. Taylor Manager Atlanta Aircraft Certification Office

(Title)

FFC Manufacturing 4010 Pilot Dr., Suite 103 Memphis, TN 38118 (See continuation 2 of 3) Make : Beech Model : (See continuation 2 of 3) Date of application : March 20, 1997

Date of issuance : June 16, 1997

Date reissued : May 05, 2009

Date amended : January 7, 2013

(Signatur

United States of America Department of Transportation - Federal Aviation Administration Supplemental Type Certificate (Continuation Sheet) Number SA01335AT-D

FAA FORM 8110-2-1(10-69) PAGE 2 of 3 PAGES

Aircraft Model Eligibility:

Part Number Type Certification Aircraft Model Serial Number Eligibility FFC P/N 2510-9(-10) A3SO-CAR 3 65, 80, A80 LC-1 through LC-239 LD-2 through LD-269

FFC P/N 2510-11(-12) A3SO-CAR 3 A65, 70, B80 LC-240 through LC324

FFC P/N 2534-11(-12) A3SO-CAR 3 65, 80, A80 A65, 70, B80

90, A90, B90 LB-1 and after LD-280 and after LC-240 and after LJ-114 and after LW-1 and after LA-2 and after

FFC P/N 2554-11(-12) A3SO-CAR 3 65, 80, A80 A65, 70, B80

90, A90, B90 LB-1 and after LD-280 and after LC-240 and after LJ-114 and after

FFC P/N 2101-7(-8) A3SO-CAR 3 C90, C90A, E90 F90

LW-1 and after LA-2 and after

FFC P/N 2554-15(-16) A14CE-CAR 3 100, 100A, B100 A100A, A100C B-2 through B-89 and B-91 through B93

FFC P/N 2534-11(-12) A14CE-CAR 3 100, 100A, B100

All serial numbers FFC P/N 2101-7(-8) A14CE-CAR 3 100, 100A, B100

B-1, B-90, B-93, BE-1 and after FFC P/N 2534-19(-20) A24CE-CAR 3 200, 200T, 200C, 200CT, B200, B200C B200T, B200CT, B200GT, B200CGT, 300, B300

All serial numbers

FFC P/N 2101-7(-8) A24CE-CAR 3 200, 200T, 200C, 200CT, B200, B200C, B200T, B200CT, B200GT, B200CGT, 300, B300

All serial numbers

United States of America Department of Transportation - Federal Aviation Administration Supplemental Type Certificate (Continuation Sheet) Number SA01335AT-D

FAA FORM 8110-2-1(10-69) PAGE 3 of 3 PAGES

FFC Manufacturing part numbers 2510-9(-10) are replacements for Beech part numbers 50-921510-1, (-2), (-5), (-6), (-9), (-10), (-13), (-14).

FFC Manufacturing part numbers 2510-11(-12) are replacements for Beech part numbers 50-921510-3, (-4), (-7), (-8), (-11), (-12), (-15), (-16).

FFC Manufacturing part numbers 2534-11(-12) are replacements for Beech part numbers 50-389034-1, (-2), (-3), (-4), (-5), (-6), (-7), (-8), (-9), (-10), ( -11), (-12).

FFC Manufacturing part numbers 2534-19(-20) are replacements for Beech part numbers 50-389034-17, (-18), (-19), (-20).

FFC Manufacturing part numbers 2554-11(-12) are replacements for Beech part numbers 50-921554-1, (-2), (-3), (-4), (-5), (-6), (-7), (-8), (-9), (-10), ( -11), (-12).

FFC Manufacturing part numbers 2554-15(-16) are replacements for Beech part numbers 50-921554-15, (-16).

FFC Manufacturing part numbers 2101-7(-8) are replacements for Beech part numbers 100-381001-1, (-2), (-3), (-4), (-5), (-6), (-7), (-8).