STC SA01370SE

United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate Number: SA01370SE This certificate issued to: BAS, Inc.

411 Super Cub Drive North PO Box 190 Eatonville, WA 98328 Part * of the * Regulations.

Original Product -Type Certificate Number: * See Attached FAA Approved Model List SA01370SE Make: for List of Approved Airplane Models Model: and Applicable Airworthiness Regulations Description of Type Design Change: Installation of BAS, Inc. Shoulder Harness in accordance with BAS, Inc.

Drawing List, which includes Instailation Instructions, and Instructions for Continued Airworthiness, listed on FAA Approved Model List (AML) SA01370SE, dated January 26, 2004 or later FAA-approved revision.

Limitations and Conditions: Approval of this change in type design applies to the above model aircraft only. This approval should not be extended to other aircraft of this model on which other previously approved modifications are incorporated unless it is determined that the relationship between this change and any of those other previously approved modifications, including changes in type design, will introduce no adverse effect upon the airworthiness of that aircraft.

A copy of this Certificate, Instructions for Continued Airworthiness listed on AML SA01370SE, and AML SA01370SE, dated January 26, 2004, or later FAA-approved revision, must be maintained as part of the permanent records for the modified aircraft.

If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.

Date of Application: December 15, 2003 Date Reissued:

Date of Issuance: January 26, 2004 Date Amended: December 02, 2010 FEDERAL AVIATION By Direction of the Administrator TOMINIST RATION (Signature) Acting Manager, Seattle Aircraft Certification Office (Tisle)