STC SA01561CH

Supplemental type certificate · D'Shannon Products Ltd.

Holder
D'Shannon Products Ltd. · United States
Status
Current · Reissued
Status date
May 18, 2023
Applied
April 30, 2001
Product
Aircraft · Small Airplane

From FAA DRS, with our copy of the certificate PDF. DRS record last changed December 5, 2025.

What it approves

Installation of Hartzell Model PHC-(C, L)3YF-1RF/F8068(-2) three bladed propeller on Raytheon Aircraft Company (Beech) aircraft equipped with Teledyne Continental Motors six-cylinder engines

What the certificate saysOCR

This is OCR from the scanned FAA certificate. OCR can misread letters and numbers.

United States of America Department of Transportation Federal Aviation Administration TAIN STRATO Supplemental Type Certificate Number: SA01561CH This certificate issued to: D'Shannon Products, Ltd.

1309 County Road 134 Buffalo, MN 55313 * of _the * Regulations Type Certificate Number: Original Product *See Approved Model List Make: *See Approved Model List Description of Type Design Change: Model: *See Approved Model List Installation of Hartzell Model PHC-(C, L)3YF-1RF/F8068(-2) three bladed propeller on Raytheon Aircraft Company (Beech) aircraft equipped with Teledyne Continental Motors six-cylinder engines in accordance with D'Shannon Products Installation Instructions as listed on AML No. SA01561CH, or later FAA approved revision.

1. Compatibility of this design change with previously approved modifications must be determined by the installer.

(See Continuation Sheet 3 of 3) Aviation Administration. suspended, revoked, or a termination date is otherwise established by the Administrator of the Federal Paul (Vu) Nygen Title: Manager, Central Certification Branch Compliance & Airworthiness Division Aircraft Certification Service Modification is limited to aircraft that have been converted by D'Shannon Products STCs SA1-569, SA2361SW, and Black Aviation, Inc. STC SA1864SW, T-34 Mentors, LLC STC SA1450SW, or Western Skyways, Inc. STC SA8676SW/SE8677SW.

3. FAA approved Airplane Flight Manual Supplement FMS-F8068-2, Rev. 2, dated April 20, 2023 or later FAA approved revision is required. Refer to FMS-F8068-2 for eligible hub applications.

4. Eligible engines: Teledyne Continental Motors IO-470-J, -K, -C, and -N, 10-520-B, -BA, -BB, TSIO-520-D, -DB and IO-550-B (limited to 285 hp).

5. Check aircraft Weight and Balance.

6. A copy of this certificate and FAA Approved Model List (AML) No. SA01561CH, dated September 3, 2003, or later FAA approved revision must be maintained as part of the permanent records for the modified aircraft.

7. If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.

- END - (14 CFR 21.47). This FAA Form 8110-2 (03/21) Page 3 of 3

ADs that name this STC · 0

An AD can apply because an STC is installed, or mention one in its text.

No AD in this release names this STC

Approved models · 33

MakeModelData sheet
Hawker Beechcraft Corporation35-333A15
Hawker Beechcraft Corporation35-A333A15
Hawker Beechcraft Corporation35-B333A15
See all 33 models

Every issue · 3

DRS keeps each issue of an STC as its own record, with its own certificate and attachments.

DateStatusFiles
May 18, 2023Reissued, currentCertificateApproved model list
June 17, 2011Reissued, earlier issueCertificateApproved model list
March 7, 2011Reissued, earlier issueCertificateApproved model list