STC SA01625AT-D

This certificate issued to

Part 3 of the Civil Air Regulations.

Description of Type Design Change: Installation of replacement fuel cell assemblies in accordance with FFC Manufacturing Drawings B-2510-6, dated March 15, 1998; or later FAA approved revision.

Limitations and Conditions: This approval should not be extended to other aircraft of these models on which other previously approved modifications are incorporated unless it is determined by the installer that the interrelationship between this change and any of those other previously approved modifications will introduce no adverse effects upon the airworthiness of the aircraft. If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.

(See continuation 3 of 3)

FFC Manufacturing 4010 Pilot Dr., Suite 103 Memphis, TN 38118 5A4 Make: Beech Model: (See continuation 3 0f 3) Date reissued: May 05, 2009

( Signature) Melvin D. Taylor Manager Atlanta Aircraft Certification Office

( Title)

Date of application: April 27, 1198

Date of issuance: October 16, 1998

FAA FORM 8110-2-1(10-69) PAGE 2 of 3 PAGES

Number SA01625AT-D

FAA FORM 8110-2-1(10-69) PAGE 3 of 3 PAGES

Number SA01625AT-D

Model Continuation:

Beech models 50, B50, C50, D50, D50A, D50B, D50C, D50E, E50, F50, G50, H50, J50, 65, A65, 80, A80, B80.

Limitations and Conditions – Continued:

FFC Manufacturing part numbers 2510-6 will be replacements for Beech part numbers 50-920010- 2(-6) and FFC Manufacturing part numbers 2510-7 will be replacement for Beech part numbers 50- 920010-3(-7).