STC SA01721CH

Supplemental type certificate · Baumann Floats LLC

Holder
Baumann Floats LLC · United States
Status
Current · Reissued
Status date
May 25, 2022
Applied
September 13, 2001
Product
Aircraft · Single-Engine
Certification basis
Part 23
Data sheet
TCDSA22NM

From FAA DRS, with our copy of the certificate PDF. DRS record last changed December 6, 2025.

What it approves

Installation of Baumann Model BF2150A floats per Baumann Drawing List BF-2150A-01, Rev B, dtd 9/19/02 or later FAA approved revisions.

What the certificate says

From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.

FAA FORM 8110-2(10-68) PAGE 1 of 3 PAGES Number SA01721CH Reissued on 05/25/22 to supersede the original STC, which has been lost or misplaced.

This certificate issued to Part 23 of the Federal Aviation Regulations.

(See Type Certificate Data Sheet Number A22NM for the complete certification basis).

Installation of Baumann Model BF2150A floats in accordance with Baumann Drawing List BF-2150A-01, Revision B, dated September 19, 2002, or later FAA approved revisions.

1. Compatibility of this design change with previously approved modifications must be determined by the installer.

2. F AA Approved Floatplane Flight Manual Supplement for Baumann Model BF2150A floats, Revision A, dated September 10, 2002, or later FAA approved revisions, is required with this modification when installing Baumann Model BF2150A floats on the Sky International, Inc. aircraft models listed above.

(Continued on page 3)

Baumann Floats, LLC 255 West 35th Avenue Oshkosh, WI 54902 A22NM Make : Sky International, Inc.

Model : A-1, A-1A, A-1B Date of application : September 13, 2001 Date of issuance : October 28, 2002 Date reissued : May 25, 2022 Date amended :

(Signature) Monica L. Nemecek Manager, Airframe and Administrative Services Section Chicago ACO Branch

(Title)

Transfer the ownership of Supplemental Type Certificate Number

to (Name of transferee)

(Address of transferee) (Number and street)

(City, State, and ZIP code)

from (Name of grantor) (Print of type)

(Address of grantor) (Number and street)

(City, State, and ZIP code)

Signature of grantor (In ink):

FAA FORM 8110-2-1(10-69) PAGE 3 of 3 PAGES

Number SA01721CH

Date of Issuance: October 28, 2002 Date Reissued: May 25, 2022

LIMITATIONS AND CONDITIONS: (Continued from page 1 of 3)

3. Aviat Aircraft, Inc. is licensed by Sky International, Inc. to manufacture and obtain airworthiness certificates for the Model A-1, A-1A and A-1B in Note 11 of Type Certificate Data Sheet No. A22NM.

4. The Model A-1B, as modified in accordance with this Supplemental Type Certificate, is limited to a maximum landing weight of 2090 lbs. in accordance with FAA Approved Floatplane Flight Manual Supplement for Baumann Model BF2150A floats, Revision A, dated September 10, 2002, or later FAA approved revisions. This restriction applies to landings on land only and is not applicable to water operations

5. If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.

-END-

ADs that name this STC · 0

An AD can apply because an STC is installed, or mention one in its text.

No AD in this release names this STC

Approved models · 3

MakeModelData sheet
Sky International Inc.A-1A22NM
Sky International Inc.A-1AA22NM
Sky International Inc.A-1BA22NM