STC SA01751SE

Number SA01751SE

This certificate, issued to Fliegen Works, Inc.

921 SE 47th Ave Portland, OR 97215

Part * of the * Regulations.

Original ProductType Certificate Number: * See attached Federal Aviation Administration (FAA) Make: Approved Model List (AML) SA01751SE for approved Model: aircraft models and applicable airworthiness regulations

Description of the Type Design Change: Fabrication and Installation of Panida Doubler in accordance with Master Drawing List and Installation Instructions as listed on AML SA01751, dated July 25, 2019, or later Federal Aviation Administration (FAA) Approved revision. Maintained in accordance with the Instructions for Continued Airworthiness (ICA) contained in the Installation Instructions, as listed on AML SA01751, dated July 25, 2019, or later FAA Approved revision..

Limitations and Conditions: Approval of this change in type design applies to the aircraft listed on AML SA01751SE only. This approval should not be extended to other aircraft of these models on which other previously approved modifications are incorporated unless it is determined by the installer that the relationship between this change and other previously approved modifications will introduce no adverse effect upon the airworthiness of that aircraft. A copy of this certificate, AML SA01751SE, and the applicable Installation Instructions as listed in the AML, must be maintained as part of the permanent records for the modified aircraft.

If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.

Date of application: December 29, 2006 Date reissued: August 24, 2011 Date of issuance: May 3, 2007 Date amended: July 25, 2019

FAA FORM 8110-2 (5/14) PAGE 1 OF 2 PAGES By direction of the Administrator

(Signature)

Acting Manager, Seattle ACO Branch (Title)

Transfer the ownership of Supplemental Type Certificate Number

to (Name of Transferee)

(Address of Transferee)

(Number and Street)

(City, State, and ZIP Code)

from (Name of Grantor) (Print or Type)

(Address of Grantor)

(Number and Street)

(City, State, and ZIP Code)

Signature of Grantor (In Ink):

U.S. GPO: 1987-763-289