STC SA01807NY

FAA Form 8110-2 (5/14) Page 1 of This certificate issued to:

Part of the Original Product – Type Certificate Number: Make:

By Direction of the Administrator Signature Title March 16, 2017 SA01807NY RARE AIRCRAFT, LTD.

3401 Highway 21 West Faribault, MN 55021 Federal Aviation Regulations.

1. Increase the maximum approved gross weight to 2880 lbs in accordance with Master Drawing List CW 1000, Rev. F, dated November 7, 2016.

1. The installer must determine whether this design change is compatible with previously approved modifications.

2. If the holder agrees to permit another person to use this certificate to alter a product, the holder must give the other person written evidence of that permission.

(See Limitations and Conditions continued on Page 3 of 3) Gaetano Sciortino Manager New York Aircraft Certification Office *See attached FAA AML No. SA01807NY *See attached FAA AML No. SA01807NY January 9, 2017 February 27, 2003 July 29, 2004 *See attached FAA Approved Model List (AML) No. SA01807NY for the list of approved aircraft models and applicable airworthiness regulations.

FAA Form 8110-2 (5/14) Page 2 of

To (Name and address of transferee)

From (Name and address of grantor)

3 SA01807NY

FAA Form 8110-2 (5/14) Page 3 of

3 Date Reissued: March 16, 2017

3. Operate in accordance with CG limitations:

• Operations at a gross weight of 2650 pounds or less requires that the CG range be limited as follows:

C.G. Limits: (-12.6) to (-4.0)

• Operations at a gross weight between 2650 and 2880 pounds requires that the CG range be limited as follows:

C. G. Limits: (-8.92) to (-6.07)

4. The installation defined in the "Prerequisite Installation" section of the Master Drawing List CW 1000, Rev. F, dated November 7, 2016, are prerequisites for the installation of this STC on other WACO UPF-7, VPF-7, YPF-7, or ZPF-7 airplanes. The prerequisite installations are not approved as part of this STC, nor does this STC constitute an approval of any specific engine or propeller installation.

5. Any separately approved engine installation meeting the Prerequisite Installation requirements must also have a Dry Weight as listed on the Engine Type Certificate Data Sheet not to exceed 530 lbs.

----------END---------- SA01807NY