STC SA01935LA

FAA Form 8110-2 (5/14) Page 1 of 2

Part 23 of the Federal Aviation Regulations. (See Page 3 for complete certification basis)

Installation of external aft body strakes, in accordance with FAA approved Aircraft Performance Modifications Master Drawing List as listed in AML No. SA01935LA, Revision IR, or later FAA approved revision.

1. FAA accepted Instructions for Continued Airworthiness is required, as listed in AML No.

SA01935LA, Revision D, or later FAA approved revision. These Instructions for Continued Airworthiness must be available in accordance with 14 CFR Part 21.50(b).

2. Compatibility of this design change with previously approved modifications must be determined by the installer.

3. If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.

4. A copy of this certificate must be maintained as a part of the permanent records of the aircraft.

Date of Application: February 1, 2005 Date Reissued: February 5, 2007 Date of Issuance: December 28, 2006 Date Amended: 04/17/2007; August 14,2009; November 28 , 2017 By Direction of the Administrator

Signature

SA01935LA

Aircraft Performance Modifications 24 Sandford Road Colorado Springs, CO 80906

See attached FAA Approved Model List (AML) No. SA01935LA for list of approved airplane models and type certification basis

Todd G. Dixon Manager, Denver ACO Branch Compliance and Airworthiness Division

FAA Form 8110-2 (5/14) Page 2 of 2

To (Name and address of transferee)

From (Name and address of grantor)

FAA Form 8110-2 (5/14) Page 3 of