What it approves
Installation of a Benz Airborne Systems Torque Pressure System.
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
United States Of America Department of Transportation - Federal Aviation Administration Supplemental Type Certificate Project No. SA8173SC-A KC
FAA Form 8110-2(10-68) Page 1 of 1 Number SA01969CH This Certificate issued to Benz Airborne Systems 2400 Handley-Ederville Road Fort Worth, TX 76118
Part 3 of the Civil Air Regulations.
See Type Certification Data Sheet A9EA for complete certification basis.
Original Product Type Certificate Number : A9EA Make : Bombardier, Inc.
Model : DHC-6-100, DHC-6-200, DHC-6-300
Description of Type Design Change: Installation of a Benz Airborne Systems Torque Pressure System in accordance with Armstrong Aerospace Master Data List, Document Number DC104-3021-00, Revision B, dated July 18, 2005, or later FAA approved revision.
1) Compatibility of this design change with previously approved modifications must be determined by the installer.
2) If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.
3) For models DHC-6-100 and DHC-6-200, this installation is only applicable when the airplane has been modified with PT6A-27 engines.
b Date of application : November 04, 2003
Date of issuance : April 29, 2004 Date reissued : October 04, 2004
Date amended : August 10, 2005, Rev. 1
( Signature) Fred Stellar Acting Manager, Special Certification Office Southwest Region
(Title)
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.