STC SA02008NY

FAA Form 8110-2 (5/14) Page 1 of

Part of the

Signature

Title SA02008NY BE Aerospace, Inc DBA SMR Technologies, Inc 93 Nettie Fenwick Rd Fenwick, WV 26202-4000 Federal Aviation Regulations.

1. Installation of SMR Technologies pneumatic de-icer models in accordance with installation instructions on SMR Technologies Drawing List as listed on AML No. SA02008NY.

2. The Maintenance Instructions for Continued Airworthiness contained in SMR Technologies Installation and Maintenance Manual, report # 97-33-047, Rev. 13, dated January 14, 2015, or later approved revision is required with this modification.

1. Approval for installation of replacement parts for existing Goodrich Type 23 boots must be made in left and right pairs on wings or tail.

2. A copy of this certificate and FAA Approved Model List (AML) No. SA02008NY must be maintained as part of the permanent records for the modified aircraft.

3. The installer must determine whether this design change is compatible with previously approved modifications.

4. If the holder agrees to permit another person to use this certificate to alter a product, the holder must give the other person written evidence of that permission.

Gaetano Sciortino Manager New York Aircraft Certification Office * * See attached FAA Approved Model List (AML) No.

SA02008NY or later FAA approved revision for the list of approved airplane models, applicable installation data, and specific limitations.

February 3, 2017 February 6, 2004 October 6, 2004 * 3

FAA Form 8110-2 (5/14) Page 2 of

To (Name and address of transferee)

From (Name and address of grantor)

3 SA02008NY

FAA Form 8110-2 (5/14) Page 3 of

3 Date Amended: February 3, 2017

Certification Basis:

Based on 14 CFR § 21.17 and § 21.101, and the FAA policy for design changes that are identified as not significant in FAA Order 8110.48, the certification basis for the aircraft listed on the AML is as follows:

a. The type certification basis for parts not changed or not affected by the change is shown on TCDS listed in AML.

b. The modification certification basis for parts changed or affected by the change shown on TCDS listed in AML.

----------END---------- SA02008NY