STC SA02010WI

$Q\DOWHUDWLRQRIWKLVFHUWLILFDWHLVSXQLVKDEOHE\D ILQHRIQRWH[FHHGLQJRULPSULVRQPHQWQRWH[FHHGLQJ\HDUVRUERWK7KLVFHUWLILFDWHPD\EHWUDQVIHUUHGRUPDGH DYDLODEOHWRWKLUGSHUVRQVE\OLFHQVLQJDJUHHPHQWVLQDFFRUGDQFHZLWK&)53RVVHVVLRQRIWKLV6XSSOHPHQWDO7\SH&HUWLILFDWH 67& GRFXPHQWE\SHUVRQVRWKHUWKDQ WKH67&KROGHUGRHVQRWFRQVWLWXWHULJKWVWRWKHGHVLJQGDWDQRUWRDOWHUDQDLUFUDIWDLUFUDIWHQJLQHRUSURSHOOHU7KH67&¶VVXSSRUWLQJGRFXPHQWDWLRQ GUDZLQJVLQVWUXFWLRQV SURSHOOHUPXVWSURYLGHWKDWSHUVRQZLWKZULWWHQSHUPLVVLRQDFFHSWDEOHWRWKH)$$ 5HI&)5  )$$)RUP  3DJH RIBBB United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate Number:

BB__.

Original Product 7\SH&HUWLILFDWH1XPEHU Make:

SA02010WI Mid-Continent Instruments and Avionics 9400 East 34th Street North Wichita, KS 67226 Part 23 Federal Aviation Regulations Multiple - AML STC See attached FAA Approved Model List (AML) SA02010WI issued March 6, 2023 or later FAA approved revision for the list of approved models, applicable installation data requirements, and specific limitations.

Installation of the Mid-Continent Instruments & Avionics MD23 FLEX Custom Function Display (CFD) on Part 23 aircraft in accordance with Master Data List 22-002-DC4301 specified on the attached FAA Approved Model List (AML) issued March 6, 2023, or later FAA approved revision.

(1) Approval of this change in type design applies to the aircraft listed on the AML only.

(2) The installer must determine whether this design change is compatible with previously approved modifications. (Limitations and Conditions continued on Page 3 of 3) June 28, 2022 March 6, 2023 Kathryn Oatman Aeronautix Project ODA administrator ODA-834865-CE 3

$Q\DOWHUDWLRQRIWKLVFHUWLILFDWHLVSXQLVKDEOHE\D ILQHRIQRWH[FHHGLQJRULPSULVRQPHQWQRWH[FHHGLQJ\HDUVRUERWK7KLVFHUWLILFDWHPD\EHWUDQVIHUUHGRUPDGH DYDLODEOHWRWKLUGSHUVRQVE\OLFHQVLQJDJUHHPHQWVLQDFFRUGDQFHZLWK&)53RVVHVVLRQRIWKLV6XSSOHPHQWDO7\SH&HUWLILFDWH 67& GRFXPHQWE\SHUVRQVRWKHUWKDQ WKH67&KROGHUGRHVQRWFRQVWLWXWHULJKWVWRWKHGHVLJQGDWDQRUWRDOWHUDQDLUFUDIWDLUFUDIWHQJLQHRUSURSHOOHU7KH67&’s supporting documentation (drawings, instructions, SURSHOOHUPXVWSURYLGHWKDWSHUVRQZLWKZULWWHQSHUPLVVLRQDFFHSWDEOHWRWKH)$$ 5HI&)5  )$$)RUP  3DJH RIBBB United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate Number:

Too (Name and address of transferee):

Date oI transfer:

SA02010WI 3

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nited States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate (Continuation Sheet) Number: SA02010WI Issuance Date: March 6, 2023 Limitations and Conditions (continued from page 1):

Certification Basis (continued from page 1):

Based on 14 CFR §§ 21.115 and 21.101 and the FAA policy for significant changes in FAA Order 8110.48, the certification basis for this change is as follows:

a. The certification basis for parts not changed or not affected by this change is shown on the attached AML.

b. The certification basis for parts changed or affected by the change is as follows:

33 Section

23.1

23.29

23.301(a)(b)(c)

23.303

23.305(a)

23.307(a)

23.337(a)(b)

23.341

23.561(b)(3)

23.601

23.603

23.605(a)

23.607

23.609

23.611

23.613(a)(b)(c)

23.619

23.625(a)(b)(c)

23.771(a)

23.773(a)(1)(2) Amendment 23-34 23-21 23-48 23-0 23-45 23-0 23-48 23-48 23-62 23-0 23-23 23-23 23-48 23-0 23-48 23-45 23-7 23-7 23-14 23-45C Section

23.1301

23.1306(b)

23.1308(b)(c)

23.1309(a)(1)(2)(c)(d)

23.1311(a)(2)

23.1321(c)

23.1323(a)(b)(c)(e)

23.1325(a)(b)(1)(ii)(iii)(2)

23.1351(a)(1)(2)(b)(1)(i)(iii)

23.1353(h)

23.1357(a)(c)(d)

23.1359(a)(c)

23.1365(a)(d)(e)

23.1381(a)(b)(c)

23.1431(a)(b)

23.1529

23.1541(a)(b)

23.1581(a)(b)(1)(2)(c)(f)

23.1583(m)

23.1585(j) Amendment 23-62 23-61 23-57 23-62 23-62 23-49 23-62 23-50 23-49 23-49 23-43 23-49 23-49 23-0 23-62 23-26 23-21 23-50 23-62 23-62 ---- END ----