STC SA02018SE-D

Part 23* of the Federal Aviation Regulations.

Original Product--Type Certificate Number: *See attached Approved Model List (AML) NO. SA02018SE-D Make: dated January 4, 2011 or later FAA approved revision for list of Model: approved aircraft models and applicable airworthiness regulations.

Description of Type Design Change: Provisions installation of Garmin GPS/XM Antennas in accordance with FAA Approved Model List (AML) SA02018SE-D, dated January 4, 2011, or later FAA approved revision, and FAA Approved GPS/XM Antenna STC Master Drawing List, Document No.: 005-00638-01, Revision “1”, approved on January 4, 2011, or later FAA approved revision.

1. Compatibility of this design change with previously approved modifications must be determined by the installer.

2. A copy of this certificate must be maintained as part of the permanent records for the modified aircraft.

3. If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.

4. Aircraft modified by this STC must be maintained in accordance with the Instructions for Continued Airworthiness (ICA) listed in the MDL identified above.

Garmin International, Inc.

1200 East 151st Street Olathe, KS 66062 Date of application: July 22, 2010

Date of issuance: January 4, 2011

( Signature) Robert M. Grove ODA STC Unit Administrator ODA-240087-CE Garmin International, Inc.

( Title)

Transfer the ownership of Supplement Type Certificate Number

To (Name of transferee) (Number and street)

(City, State and Zip code)

From (Name of granter) Print or type

(Address of granter) (Number and street)

(City, State and Zip code)

Signature of grantor (In Ink):

FAA FORM 8110-2-1(10-69) PAGE 3 of 3 PAGES

Number SA02018SE-D

Date of Issuance: January 4, 2011

*Certification Basis Based on 14 CFR §§ 21.115 and 21.101, and the FAA policy for significant changes in FAA Order 8110.48, the certification basis for this change is as follows:

a. The certification basis for parts not changed or not affected by this change is shown on the attached AML.

b. The certification basis for parts changed or affected by this change is:

Regulations at the latest amendment: No Amdt through 23-59

Section Amdt Section Amdt

23.251 23-45 23.609 No Amdt

23.301(a)(b)(c) 23-48 23.611 23-48

23.303 No Amdt 23.613(a) 23-45

23.305(a) 23-45 23.867 23-49

23.307(a) No Amdt 23.1301 23-20

23.603 23-23 23.1308(a)(b)(c) 23-57

23.605(a) 23-23 23.1309(a)(1)(b)(1)(e) 23-49

23.607(a) 23-48 23.1431(a)(b) 23-49

23.1529 23-26

------------------------------------------------END------------------------------------------------