STC SA02048SE

Number SA02048SE

This certificate, issued to: Stene Aviation, Inc.

470 Regatta Road, Hangar #1 Polson, MT 59860

Part 23 of the Federal Aviation Regulations.

Original Product⎯Type Certificate Number: * See Approved Models List SA02048SE Make: * See Approved Models List SA02048SE Model: * See Approved Models List SA02048SE

Description of the Type Design Change: Fabrication of Stene Aviation, Inc. Wing Tip Part Numbers SA-1223000-7 and SA-1223000-8 in accordance with Stene Drawing No. SA-1223000-7 and -8, Revision “-”, dated September 21, 2008, or later FAA-approved revision; and installation and maintenance in accordance with Stene Aviation Instructions for Continued Airworthiness and Installation Instructions, Report No. SA-WT01, Revision NC, dated January 27, 2010, or later FAA-accepted revision.

Limitations and Conditions: Approval of this change in type design applies to the aircraft listed in Approved Model List SA02048SE only. This approval should not be extended to other aircraft of these models on which other previously approved modifications are incorporated unless it is determined by the installer that the relationship between this change and any of the other previously approved modifications, including changes in type design, will introduce no adverse effect upon the airworthiness of that aircraft.

A copy of this certificate and the Instructions for Continued Airworthiness must be maintained as part of the permanent records of the modified aircraft.

If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.

Date of application: September 26, 2008 Date reissued:

Date of issuance: February 02, 2010 Date amended:

(Signature) Acting Manager, Seattle Aircraft Certification Office (Title) Original Signed by Scott A. Fung