What it approves
Installation of an electrical trim system for the horizontal stabilizer.
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
This Certificate issued to Aeroplane Factory 885 Taildragger Road Gardnerville, Nevada 89410
Part 4a* of the Civil Air Regulations. *Certification basis is set forth in Type Certificate Data Sheet A-766 Original Product Type Certificate Number :
A-766 Globe GC-1B Description of Type Design Change: Installation of an electrical trim system for the horizontal stabilizer, in accordance with the Aeroplane Factory Master Drawing List, No. 603-100, Revision G, dated November 10, 2006, or later FAA approved revision. Maintain and operate in accordance with Instructions for Continued Airworthiness for the Aeroplane Factory Electric Trim Installed on the Swift GC-1B, No. ICA-Trim, Revision C, dated February 26, 2004, and Airplane Flight Manual Supplement for the Aeroplane Factory Electric Trim System installed on the Globe Swift, No. FMS-Trim, Revision IR, dated June 13, 2007 or later FAA approved revisions.
Limitations and Conditions: The installation should not be incorporated in any aircraft unless it is determined that the interrelationship between this installation and any previously approved configuration will not introduce any adverse effect upon the airworthiness of the aircraft. The approval of this modification applies to the above noted aircraft models only. A copy of this STC must be included in the permanent records of the modified aircraft. If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.
Date of application : June 12, 2003
Date of issuance : June 15, 2007
Original signed by Gregory S. Dilibero ( Signature) Manager, Airframe Branch Los Angeles Aircraft Certification Office ( Title)
Transfer the ownership of the Supplemental Type Certificate Number to (Name of transferee) (Address of transfer) (Number and street)
(City, State, and Zip code) from (Name of grantor) (Print or type) (Address of grantor) (Number and street)
(City, State, and Zip code) Extent of Authority (if licensing agreement):
Signature of grantor (In ink):
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.
Approved models · 1
| Make | Model | Data sheet |
|---|---|---|
| Swift Museum Foundation Inc. | GC-1B | A-766 |