STC SA02069AK

Supplemental type certificate · Airglas Inc.

Holder
Airglas Inc. · United States
Status
Current · Amended
Status date
August 3, 2026
Applied
May 5, 1995
Product
Aircraft · Small Airplane

From FAA DRS, with our copy of the certificate PDF. DRS record last changed August 7, 2026.

What it approves

Fabrication and installation of the Airglas, Inc., Landes PA32-206LA Nose Fork equipped with up to a 8.50 x 6 tire

What the certificate says

From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.

Part * of the * Regulations.

Decsription of Type Design Change: Fabrication and installation of the Airglas, Inc., Landes PA32-206LA Nose Fork equipped with up to a 8.50 x 6 tire (see Limitations and Conditions) in accordance with Airglas, Inc. Master Data List Number PA32-206LA, Revision I, dated February 9, 2015 or later FAA approved revision.

Limitations and Conditions: Airplanes incorporating this design change may be equipped with 6.00 x 6, 7.00 x 6, 8.00 x 6, or 8.50 x 6 tires on the nose and main wheels. The nose tire must be the same size as the main tires or one of the combinations as listed on the applicable FAA Approved Supplemental Flight Manual (SAFM) or Airplane Flight Manual Supplement (AFMS), which is a required part of this modification. Refer to the FAA Approved Model List (AML) No.

SA02069AK for the required SAFM/AFMS document applicable to each approved make and model.

Compatibility of this design change with previously approved modifications must be determined by the installer. When utilizing SAFM/AFMS No. AE96-5FM, Revision D, with Cessna models U206F, TU206F, U206G and TU206G, this STC has been found compatible with STC No. SA4366WE when all three tires are the same size.

If the holder agrees to permit another person to use this Certificate to alter a product, then the holder shall give that person written evidence of such permission.

14 CFR Part 43 is adequate to ensure continued airworthiness of this modification.

Airglas, Inc.

3500 O’Malley Road Anchorage, AK 99507 * Refer to the attached FAA Approved Model List (AML) No.

SA02069AK, Revision H, dated February 9, 2015, or later FAA approved revision, for approved airplane makes and models, corresponding Type Certificate numbers, and applicable airworthiness regulations.

Date of application: May 5, 1995 Date of issuance: January 29, 1997

Date reissued: May 18, 2000 Date amended: May 18, 2000; September 15, 2000;

November 30, 2001; January 5, 2004;

June 5, 2006; February 9, 2015

(Signature) August A. Asay Manager, Anchorage Aircraft Certification Office

(Title)

ADs that name this STC · 0

An AD can apply because an STC is installed, or mention one in its text.

No AD in this release names this STC

Approved models · 96

MakeModelData sheet
Cessna Aircraft Company1503A19
Cessna Aircraft Company150A3A19
Cessna Aircraft Company150B3A19
See all 96 models

Every issue · 3

DRS keeps each issue of an STC as its own record, with its own certificate and attachments.

DateStatusFiles
August 3, 2026Amended, currentCertificateApproved model list
February 9, 2015Amended, earlier issueCertificateApproved model list
June 5, 2006Amended, earlier issueCertificateApproved model list