STC SA02172AK

Part * of the * Regulations.

Fabrication and installation of Airglas, Inc. Model LC18 cargo pod kit in accordance with Airglas, Inc. Descriptive Data List No. LC18 Cargo Pod, Revision Original Issue, dated May 14, 2000 or later FAA approved revision.

Fabrication and installation of Airglas, Inc. Model LC18H cargo pod kit in accordance with Airglas, Inc. Descriptive Data list No. LC18H-I, Revision Original Issue, dated July 12, 2010 or later FAA approved revision.

1) Airplanes incorporating this design change must be operated in the Normal Category only. Landplanes and skiplanes incorporating this design change must be equipped with wheel/tire or ski installations which position the main landing gear axle centerlines at least 9 3/8 inches above the ground or bottoms of the skis. Piper PA-18A "150" and PA-18AS "150" airplanes incorporating this design change must have cabin floorboards and rear seat installations modified to the configuration of PA-18 "150" or PA-18S "150" airplanes in accordance with FAA approved data.

Compatibility of this design change with previously approved modifications must be determined by the installer.

2) FAA approved Airplane Fight Manual Supplement (AFMS) dated March 30, 2001, or later FAA approved revision, is a required part of this installation.

3) The holder of this certificate will provide each person it permits to use the certificate to alter one or more airplanes with written evidence of that permission in a form acceptable to the Administrator.

Airglas, Inc.

3500 O’Malley Rd.

Anchorage, AK 99507 * Original Product Type Certificate Number:

* * * See FAA Approved Model List (AML) SA02172AK dated July 14, 2010 or later FAA approved revision.

Date amended : July 14, 2010

( Signature) August A. Asay Manager, Anchorage Aircraft Certification Office

( Title) Date of application : January 27, 2001

Date of issuance : March 30, 2001