STC SA02191AK

14 CFR 21.120)

FAA Form 8110-2 (06/20) SUPERSEDES PREVIOUS EDITION PAGE 1 OF 3

Number: SA02191AK This certificate issued to:

Fabrication and installation of Dakota Cub extended wings and associated flaps and ailerons in accordance with Dakota Cub’s Master Data List, Document No. SA02191AK-MDL, dated February 06, 2024, or later FAA approved revision.

1. Compatibility of this design change with other previously approved modifications must be determined by the installer.

2. For Instructions for Continued Airworthiness refer to SA02191AK- ICA, Revision Org., dated November 23, 2022, or later FAA accepted revisions.

(Continued page 3 of 3)

Dakota Cub Aircraft, Inc 48473 262nd Street Valley Springs, SD 57068

Model: * See attached FAA Approved Model List (AML), No. SA02191AK, dated April 04, 2024, or later FAA approved Make: revision, for the list of approved airplane models, corresponding Type Certificate numbers and applicable airworthiness regulations.

Date of application: November 29, 1999

Date of issuance: February 01, 2002 Date reissued: April 12, 2014, September 10, 2024

Date amended: April 04, 2024 By direction of the Administrator

for Gregory S. DiLibero Title: Manager, West Certification Branch Part 23 of Federal Aviation Regulations.

14 CFR 21.120)

FAA Form 8110-2 (06/20) SUPERSEDES PREVIOUS EDITION PAGE 2 OF 3

Number: SA02191AK

Transfer Endorsement Transfer the ownership of Supplemental Type Certificate Number: SA02191AK

14 CFR 21.120)

FAA Form 8110-2 (06/20) SUPERSEDES PREVIOUS EDITION PAGE 3 OF 3

Number: SA02191AK

Date of application: November 29, 1999 Date of issuance: February 01, 2002 Date reissued: April 12, 2024, September 10, 2024 Date amended: April 04, 2024

Limitations and Conditions: (Continued from page 1)

3. FAA Approved Airplane Flight Manual Supplement (AFMS), SA02191AK- AFMS, Revision IR, dated November 23, 2022, or later FAA- approved revisions, must be installed in the airplane.

--------------------End--------------------