STC SA02192NY

This certificate issued to Aerotech Industries Inc.

Box 727 Campbell River, British Columbia V9W 6J3 Canada

Part 03 and Part 3 of the Civil Air Regulations.

Original Product -- Type Certificate Number : A-765 Make : Beech

Model : C45G, C45H, TC45G, TC45H, TC45J, D18S, 3N, 3NM, 3TM, UC45J, RC45J, JRB-6 Description of Type Design Change:

1. Interior Configuration Modification in accordance with DOT approved Aerotech Industries Inc. Master Drawing List Number SW-001, Rev. S dated July 30, 2004, DOT approved July 30, 2004 or later DOT approved Revisions.

2. This approval covers the installation of any combination of the following components:

a. Seat and Cockpit Shoulder Harness

b. Floor Panels

c. Baggage Shelf

d. Fwd. Cargo Net with Aft Cargo Net for aft baggage compartment

e. Aft Cargo Net

1. Flight Manual Supplement “Interior Configuration Modification”, VIA-FMS(US)-01, Issue 1, dated December 7, 2005, FAA approved December 8, 2005 or later FAA approved revisions.

Date of application : May 26, 2003

Date of issuance : December 12, 2005 Date reissued :

( Signature) Anthony Socias Manager New York Aircraft Certification Office

(Title)

Number SA02192NY

FAA Form 8110-2-1(10-69) Page 2 of 2

Date of Issuance: December 12, 2005

2. Instructions for Continued Airworthiness “Interior Configura tion Modification” VIA-ICA (US)-01, Issue 1, dated December 12, 2005 or later FAA accepted revisions.

3. Compatibility of this design change with previously appr oved modifications must be determined by the installer.

4. If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.

---END---