What it approves
Install enlarged rear baggage area to accommodate skis.
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
Part 3 of the Civil Aviation Regulations (See Aircraft Specification Number 1A10 for the complete certification basis).
Install enlarged rear baggage area to accommodate skis in accordance with Reabe drawing PA23-AL, revision A dated January 18, 2007, or later FAA approved revisions; and Reabe Aztec Ski Rack Installation Instructions, no revisions, dated January 16, 2007, or later FAA approved revisions.
1. Compatibility of this design change with previously approved modifications must be determined by the installer.
2. Upholstery and other non-metallic trim components are not included with this approval.
3. Reabe Aircraft Flight Manual Supplement for PA-23-250-C, D, E, F; FAA Approved on January 9, 2006, or later FAA Approved Revisions, is required with this modification.
4. If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.
Reabe Aircraft Improvement W13105 Alp Ave.
Plainfield, WI 54966
1A10 Make:
The New Piper Aircraft, Inc.
PA-23-250 Date of application: February 3, 2005
Date of issuance : March 2, 2007
( Signature) Mary Ellen A. Schutt Manager, Airframe and Administrative Branch Chicago Aircraft Certification Office
( Title)
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.
Approved models · 1
| Make | Model | Data sheet |
|---|---|---|
| Piper Aircraft Inc. | PA-23-250 (Navy UO-1) | 1A10 |