What it approves
Remove standard Scott 3200 tail wheel and fork and replace with a Gar-Aero-32 tail wheel fork, 24 spacer, and a 4.00 x 4 6 ply tire
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
Number SA02302SE
This certificate, issued to William C. Gettle 30904-D Redwood Hwy Cave Junction, OR 97523
Part 3 of the Federal Aviation Regulations.
Original ProductType Certificate Number: 3A12 Make: Cessna Model: 172, Serial No. 28459 only
Description of the Type Design Change: Remove standard Scott 3200 tail wheel and fork and replace with a Gar-Aero-32 tail wheel fork, 24 spacer, and a 4.00 x 4 6 ply tire in accordance with Gar-Aero 400x4 Tundra Tail Wheel Drawing Number 004, dated April 7, 1989.
Limitations and Conditions: Approval of this change in type design applies to the above model aircraft, Serial No. 28459 only. This approval should not be used unless the installer determines that the relationship between this change and any other previously incorporated approved modifications will introduce no adverse effect upon the airworthiness of this aircraft.
The airplane is to be maintained in accordance with Instructions for Continued Airworthiness (ICA) SA02302SE, dated January 30, 2014, Revision New, or later Federal Aviation Administration accepted revision.
A copy of this certificate and the ICA must be maintained as part of the permanent records for the modified aircraft.
Date of application: December 15, 2011 Date reissued:
Date of issuance: February 4, 2014 Date amended:
(Signature)
Manager, Seattle Aircraft Certification Office (Title)
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.
Approved models · 1
| Make | Model | Data sheet |
|---|---|---|
| Cessna Aircraft Company | 172 | 3A12 |