STC SA02309AK

Part * of the * Regulations.

Description of Type Design Change: Installation of a stabilizer trim system in accordance with Dakota Cub Aircraft, Inc., “Stabilizer Trim Adjustment Yoke Assembly Master Drawing List MDL-01”, Revision Org, dated April 16, 2008, or later FAA approved revision. The stabilizer yoke and stabilizer adjustment screw (Part Nos. DC42672 and DC42961-2, respectively) may be installed using existing Piper original stabilizer trim system equipment if found to be in an airworthy condition.

1) The installer must determine whether this design change is compatible with previously approved modifications.

2) For instructions for continued airworthiness, refer to Dakota Cub Aircraft, Inc., “Instructions for Continued Airworthiness for Stabilizer Trim Adjustment Yoke Assembly”, Revision- Original, dated 4/13/2007, or later FAA approved revision.

3) If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.

Dakota Cub Aircraft, Inc.

Box 797 Brandon, SD 57005

* See attached FAA Approved Model List (AML) No SA02309AK for list of approved Piper airplane models and applicable airworthiness regulations.

Date of application: December 19, 2005

Date of issuance: April 17, 2008

( Signature) Gregory J. Holt Manager Anchorage Aircraft Certification Office

( Title)