What it approves
Manufacture tailplane reinforcement brackets.
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
This certificate issued to Tailwind Aviation, Inc.
491 Westcove Drive Wasilla, AK 99654
Part 3 of the Civil Air Regulations
Original Product — Type Certificate Number: A-806 Make: Viking Air Limited (deHavilland) Model: DHC-2 Mk. I, DHC-2 Mk. II, DHC-2 Mk. III
Description of Type Design Change: Manufacture tailplane reinforcement brackets in accordance with Tailwind Aviation, Inc. Master Data List TWA-C2-TPR-020, Revision A, dated 3/19/09, or later FAA approved revision.
Install in accordance with Tailwind Aviation, Inc. Reinforcement Installation TWA-C2-TPR-100, Revision A, dated 1/26/09, or later FAA approved revision.
Approval of this change in type design applies to the aircraft models listed above only. The installer must determine whether this design change is compatible with previously approved modifications. For Instructions for Continued Airworthiness refer to TWA-C2-TPR-070, Revision A, dated 3/19/09, or later FAA accepted revision. This modification is in the area subject to Airworthiness Directive 2008-11-11. The FAA has determined that this modification has no effect on compliance with AD 2008-11-11 and no alternative method of compliance is required for installation. AD 2008-11-11 must continue to be accomplished after installation of this modification.
If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.
Date of application: January 9, 2009 Date reissued:
Date of issuance: March 26, 2009 Date amended:
( Signature) Gregory J. Holt Manager, Anchorage Aircraft Certification Office
( Title)
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.