STC SA02343NY

IMPORT SA02343NY Harbour Air Ltd.

4760 Inglis Drive Richmond, British Columbia Canada V7B 1W4 CAR 3 Civil Aviation Regulations A-815 Viking Air Limited DHC-3 The installation of International Aeroproducts IntAero 8100-200 Floats using the 55-7170 attachment to be done in accordance with International Aeroproducts Inc. MDL #D305 Rev B dated October 28, 2008, Transport Canada Civil Aviation (TCCA) approved November 3, 2008, or later TCCA approved revision.

1. Operations at weights greater than the original gross weight of the aircraft on floats (7,967 lbs) requires a separate approval and the maximum gross weight must not exceed 9,000 lbs.

(See Continuation Sheet 3) September 18, 2006 March 21, 2013 February 21, 2007 April 4, 2024 Anthony E. Gallo Manager, International Validation Branch Compliance & Airworthiness Division Aircraft Certification Service 3

IMPORT SA02343NY SA02343NY 3

IMPORT SA02343NY Date Amended: April 4, 2024 Date Reissued: March 21, 2013

2. For operation at maximum weight of 9000 pounds, installation of STC SA02735NY is required equipment.

3. Maintenance must be in accordance with International Aeroproducts Inc. document BDL0507-ICA, Revision B, dated October 28, 2008, TCCA accepted October 31, 2008, or later TCCA accepted revision

4. The Installer must determine whether this design change is compatible with previously approved modifications.

• The following STCs have been examined and found to be compatible (but not required) with this STC: SA3777NM, SA327NE, and SA09866SC

5. If the holder agrees to permit another person to use the certificate to alter a product, the holder must give that other person written evidence of that permission

----------END---------- 3 3