STC SA02424AT-D

This certificate issued to

Part * of the Regulations.

Description of Type Design Change: Installation of replacement fuel cell assemblies in according to FFC Drawings B-2218-6-1 and B-2218-6-2 dated November 01, 2001 or later FAA approved revision.

Limitations and Conditions: This approval should not be extended to other aircraft of these models on which other previously approved modifications are incorporated unless it is determined by the installer that the interrelationship between this change and any of those other previously approved modifications will introduce no adverse effects upon the airworthiness of the aircraft. If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.

(See continuation 3 of 3)

FFC Manufacturing 4010 Pilot Dr., Suite 103 Memphis, TN 38118 3A15 Make: Beech Model: 35,A35,B35,C35,D35,E35,F35,G35,J35 Date reissued: April 16, 2009

( Signature) Melvin D. Taylor Manager Atlanta Aircraft Certification Office

( Title)

Date of application: June 15, 2001

Date of issuance: April 22, 2002

FAA FORM 8110-2-1(10-69) PAGE 2 of 3 PAGES

Number SA02424AT-D

FAA FORM 8110-2-1(10-69) PAGE 3 of 3 PAGES

Number SA02424AT-D

Limitations and Conditions – Continued:

FFC Manufacturing part numbers 2540-0(-1) are replacements for Beech part numbers35-921540- 0(-1). FFC Manufacturing part numbers 2218-5(-6) are replacement for Beech part numbers 35- 921218-5(-6).