What it approves
nstallation of replacement fuel cell assemblies
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
This certificate issued to
Part * of the Regulations.
Description of Type Design Change: Installation of replacement fuel cell assemblies according to FFC Manufacturing Drawings B-2003-3(-4) and B-2023-7(-8) dated November 1, 2001or later FAA approved revision.
Limitations and Conditions: This approval should not be extended to other aircraft of these models on which other previously approved modifications are incorporated unless it is determined by the installer that the interrelationship between this change and any of those other previously approved modifications will introduce no adverse effects upon the airworthiness of the aircraft. If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.
(See continuation 3 of 3)
FFC Manufacturing 4010 Pilot Dr., Suite 103 Memphis, TN 38118 3A16, A12CE Make: Beech Model: 56TC, 60 and B60 Date reissued: April 16, 2009
( Signature) Melvin D. Taylor Manager Atlanta Aircraft Certification Office
( Title)
Date of application: June 15, 2001
Date of issuance: January 3, 2002
FAA FORM 8110-2-1(10-69) PAGE 2 of 3 PAGES
Number SA02426AT-D
FAA FORM 8110-2-1(10-69) PAGE 3 of 3 PAGES
Number SA02426AT-D
Limitations and Conditions – Continued:
FFC Manufacturing part numbers 2003-3(-4) are replacements for Beech part numbers 60- 389003-3(-4). FFC Manufacturing part numbers 2023-7(-8) are replacement for Beech part numbers 60-389023-7(-8)
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.