What it approves
Manufacture four inch wider fuselage
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
This certificate issued to Dakota Cub Aircraft, Inc.
58473 262 St.
Valley Springs, SD 57068
Part 3 of the Civil Air Regulations
Original Product – Type Certificate Number: 1A2 Make: Piper Aircraft, Inc.
Model: PA-18, PA-18S, PA-18 “105”, PA-18S “105”, PA-18A, PA-18 “125”, PA-18S “125”, PA-18AS “125”, PA-18 “135”.
PA-18A “135”, PA-18S “135”, PA-18AS “135”, PA-18 “150”, PA-18A “150”, PA-18S “150”, PA-18AS “150”, PA-19 and PA-19S
Description of Type Design Change: Manufacture four inch wider fuselage in accordance with Dakota Cub Aircraft, Inc.
Wide Body Fuselage Frame Master Drawing List -01, Revision B, dated April 8, 2015, or later FAA approved revision.
Install in accordance with Dakota Cub Aircraft Wide Body Fuselage Installation Instructions DCWB-1, Revision Org, dated February 2, 2015, or later FAA approved revision.
1) The installer must determine whether this design change is compatible with previously approved modifications.
2) If the holder agrees to permit another person to use this certificate to alter a product, the holder must give the other person written evidence of that permission.
3) For Instructions for Continued Airworthiness (ICA), refer to Dakota Cub Aircraft, Inc., Instructions for Continued Airworthiness for Fuselage Assembly, Revision Original, dated December 8, 2014, or later FAA accepted revision.
Date of application: January 26, 2015 Date reissued:
Date of issuance: June 30, 2015 Date amended:
(Signature) August A. Asay Manager, Anchorage Aircraft Certification Office
(Title)
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.
Approved models · 18
| Make | Model | Data sheet |
|---|---|---|
| Piper Aircraft Inc. | PA-18 | 1A2 |
| Piper Aircraft Inc. | PA-18-105 (Special) | 1A2 |
| Piper Aircraft Inc. | PA-18-125 (Army L-21A) | 1A2 |