STC SA02548SE

Supplemental type certificate · Hood Tech Corp. Vision, Inc.

Holder
Hood Tech Corp. Vision, Inc. · United States
Status
Current · Issued
Status date
July 24, 2017
Applied
October 7, 2016
Product
Aircraft · Small Airplane
Certification basis
Part 21, Part 23
Data sheet
TCDSA00006SE

From FAA DRS, with our copy of the certificate PDF. DRS record last changed December 6, 2025.

What it approves

Installation of a Tac Rack external sensor rack

What the certificate says

From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.

Un i te d St ate s of Am e ri ca Department of Transportation - Federal Aviation Administration Supplemental Type Certificate

Number SA02548SE

This certificate, issued to Hood Tech Corp. Vision, Inc.

1750 Country Club Road Hood River, OR 97031

Part 23 of the Federal Aviation Regulations.

Original ProductType Certificate Number: A00006SE Make: Topcub Aircraft, Inc.

Model: CC18-180, CC18-180A

Description of the Type Design Change: Installation of a Tac Rack external sensor rack in accordance with Instructions for Installation and Continued Airworthiness, Report No. HTCV-006, Revision A-04, dated June 16, 2017, or later Federal Aviation Administration (FAA) approved revision. Maintained in accordance with Instructions for Installation and Continued Airworthiness, Report No. HTCV-006, Revision A-04, dated June 16, 2017, or later FAA-accepted revision. Operated in accordance with Pilot Operating Handbook and Airplane Flight Manual Supplement, Report No. HTCV-007, Revision IR, dated July 17, 2017, or later FAA-approved revision.

Limitations and Conditions: Approval of this change in type design applies to the above model aircraft only.

This approval should not be extended to other aircraft of this model series unless the installer determines that the relationship between this change and any other previously incorporated approved modifications will introduce no adverse effect upon the airworthiness of that aircraft.

Date of application: October 7, 2016 Date reissued:

Date of issuance: July 24, 2017 Date amended:

(Signature)

Manager, Seattle Aircraft Certification Office (Title)

Un i te d St ate s of Am e ri ca Department of Transportation - Federal Aviation Administration Supplemental Type Certificate (Continuation Sheet)

Number SA02548SE

Hood Tech Corp. Vision, Inc.

Issued: July 24, 2017 Reissued:

Amended:

A copy of this certificate, Report No. HTCV-006, Revision A-04, dated June 16, 2017, or later FAA-accepted revision, and Report No. HTCV-007, Revision IR, dated July 17, 2017, or later FAA-approved revision must be maintained as part of the permanent records for the modified aircraft.

If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.

Certification Basis:

Part 23 of the Federal Aviation Regulations (FAR) effective December 18, 1964, as amended by 23-1 through 23-55 and FAR 36 as amended on the date of certification. Application for type certificate, dated August 28, 2002.

- END -

FAA FORM 8110-2-1 (10-69) PAGE 3 OF 3 PAGES

ADs that name this STC · 0

An AD can apply because an STC is installed, or mention one in its text.

No AD in this release names this STC

Approved models · 2

MakeModelData sheet
Topcub Aircraft IncCC18-180A00006SE
Topcub Aircraft IncCC18-180AA00006SE