What it approves
Installation of fuel cell modifications consistent
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
This certificate issued to
Part * of the Regulations.
Description of Type Design Change: Installation of fuel cell modifications consistent with Master Document List Engineering Report 23-2810-011, I/R, dated July 22, 2003, or later FAA approved revisions.
Limitations and Conditions: This approval should not be extended to other aircraft of these models on which other previously approved modifications are incorporated unless it is determined by the installer that the interrelationship between this change and any of those other previously approved modifications will introduce no adverse effects upon the airworthiness of the aircraft. If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.
(See continuation 3 of 3)
FFC Manufacturing 4010 Pilot Dr., Suite 103 Memphis, TN 38118 3A10, 3A25, A7CE Make: Cessna Model: 310, 320, 340, 411, 421 Date reissued: April 16, 2009
( Signature) Melvin D. Taylor Manager Atlanta Aircraft Certification Office
( Title)
Date of application: March 29, 2002
Date of issuance: August 04, 2003
FAA FORM 8110-2-1(10-69) PAGE 2 of 3 PAGES
Number SA02634AT-D
FAA FORM 8110-2-1(10-69) PAGE 3 of 3 PAGES
Number SA02634AT-D
Limitations and Conditions – Continued:
FFC part numbers 9904-1(-2) and 9941-3(-4) will be replacements for Cessna part numbers 9910304-1(-2) and 9910241-3(-4) respectively.
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.