Supplemental type certificate · MAG Aerospace

Holder
MAG Aerospace · United States
Holder’s repair stations
6NOR509D6NOR509D
Status
Current · Reissued
Status date
January 2, 2024
Applied
April 28, 2012
Product
Aircraft · Small Airplane
Certification basis
Part 23
Data sheet
TCDSA37CE

From FAA DRS, with our copy of the certificate PDF. DRS record last changed December 5, 2025.

What it approves

Installation of Camera Ports

What the certificate says

From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.

SA02917NY-D MAG Aerospace 7065 Challenger Avenue Titusville, FL 32780 Part 23 Title 14 Code of Federal Regulations A37CE Cessna Aircraft Company 208, 208B Installation of Camera Ports in accordance with Delta Engineering Master Data List 0160-08107-2321 Revision A dated Sep. 13, 2023 or later FAA Approved Revisions to Delta Engineering Master Data List previously listed. The Instructions for Continued Airworthiness and Airplane Flight Manual Supplement as listed on the Master Data List is required with this installation.

1) If the holder agrees to permit another person to use the certificate to alter the product, the holder shall give the other person written evidence of that permission.

(See Limitations and Conditions Continued on Page 3 of 3) April 28, 2012 February 27, 2013, August 1, 2018, October 4, 2023, January 2, 2024 September 25, 2012 October 5, 2023 Christina M. Underwood Manager, East Certification Branch Compliance & Airworthiness Division Aircraft Certification Service 3

SA02917NY-D 3

SA02917NY-D Date Reissued: January 2, 2024

2. Compatibility of this design change with previously approved modifications must be determined by the installer.

3. This STC can only be installed on aircraft that have the activated TKS Ice Protection System (which includes a belly pod located forward of the camera port fairing) approved by a method acceptable to the FAA Administrator. The TKS system is not approved by this FAA STC.

Certification Basis: Based on 14 CFR §§ 21.115 and 21.101, and the FAA policy for significant changes in FAA Order 8110.48, this STC is a non-significant change. The certification basis for un-changed or not affected areas by this STC remains un-changed by this STC and the certification basis for the 208/208B with this STC is defined in the TCDS.

----------------------------END------------------------ 3 3

ADs that name this STC · 0

An AD can apply because an STC is installed, or mention one in its text.

No AD in this release names this STC

Approved models · 2

MakeModelData sheet
Cessna Aircraft Company208A37CE
Cessna Aircraft Company208BA37CE

Every issue · 4

DRS keeps each issue of an STC as its own record, with its own certificate and attachments.

DateStatusFiles
January 2, 2024Reissued, currentCertificate
October 5, 2023Amended, earlier issueCertificate
August 1, 2018Reissued, earlier issueCertificate
February 27, 2013Reissued, earlier issueCertificate