STC SA02998NY

FAA Form 8110-2(10-68) Page 1 of 2 Number SA02998NY This certificate issued to: Delta Engineering 13 DRBA Way New Castle County Airport New Castle, Delaware 19720

Part 23 of the Federal Aviation Regulations.

Original Product Type Certificate Number: A59EU

Make: Piaggio Aero Industries S.p.A.

Model: P-180

Cabin arrangement in accordance with Delta Engineering Master Data List 0159-07313-2271 Revision B dated Jun. 23, 2011 or later FAA approved revisions to Delta Engineering Master Data List previously listed. Instructions for Continued Airworthiness as listed on the Master Data List required for this alteration.

1. If the holder agrees to permit another person to use the certificate to alter the product, the holder shall give the other pers on written evidence of that permission.

Number SA02998NY Date of Issuance: July 1, 2011 Date reissued:

( Signature) Anthony Socias Manager New York Aircraft Certification Office

( Title) Date of application: April 7, 2011

Date of issuance: July 1, 2011

FAA Form 8110-2-1(10-69) Page 2 of 2

2. Compatibility of this design change with previously approved modifications must be determined by the installer.

Certification Basis:

Based on 14 CFR §§ 21.115 and 21.101, and the FAA policy for significant changes in FAA Order 8110.48, the certification basis for the P-180 Series aircraft with this STC is as follows:

a. The type certification basis for Piaggio P-180 Series airplanes is shown on TCDS A59EU for parts not changed or not affected by the change.

b. The certification basis for parts changed or affected by the change since the reference date of application, April 7, 2011 is based upon part 23 as amended by Amendment 23-33. Based on 14 CFR §§ 21.115 and 21.101, and the FAA policy for significant changes in FAA Order 8110.48, the certification basis for this modification was determined to be as shown on the TCDS A59EU except the regulations listed below:

Section Title At Amendment §25.853(a)(c) Compartment interiors 25-116 -------------------------------------------------END-------------------------------------------------