STC SA03013CE

FAA Form 8110-2 (11/20) SUPERSEDES PREVIOUS EDITION Page 1 of ___ United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate Number:

IMPORT SA03013CE Diamond Aircraft Industries GmbH Nikolaus-August-Otto-Strasse 5 2700 Wiener Neustadt Austria 23 Title 14 Code of Federal Regulations A00012NY Diamond Aircraft Industries Inc.

DA 62

1. Installation of alternative seating configuration for the DA 62 in accordance with Diamond Aircraft Industries GmbH Master Drawing List, document number STC 62-002, dated July 8, 2020, or later EASA approved revision.

(See Description of Type Design Change Continued on Page 3 of 3)

1. The installer must determine whether this design change is compatible with previously approved modifications.

(See Limitations and Conditions Continued on Page 3 of 3) March 8, 2021 November 29, 2021 05/05/2026 John Yoo Manager, International Validation Branch, AIR-730 Compliance & Airworthiness Division Aircraft Certification Service 3

FAA Form 8110-2 (11/20) SUPERSEDES PREVIOUS EDITION Page 2 of ___ United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate Number:

IMPORT SA03013CE 3

FAA Form 8110-2 (11/20) SUPERSEDES PREVIOUS EDITION Page ___ of ___ United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate (Continuation Sheet) Number:

IMPORT SA03013CE Date Amended: May 5, 2026 Description of Type Design Change (continued):

Installation in accordance with Diamond Aircraft Industries GmbH Master Drawing List, document number STC 62-002, dated July 8, 2020, or later EASA approved revision.

2. Aircraft is to be maintained in accordance with Diamond Aircraft Industries Instructions for Continued Airworthiness (ICA) Supplemental AMM Doc. 7.02.25-STC 62-002, dated March 17, 2020, or later EASA accepted revision.

3. Aircraft is to be operated in accordance with Diamond Aircraft Industries Airplane Flight Manual (AFM) Supplement STC 62-002 to Doc. No. 7.01.25-E and Doc. No.

11.01.05-E, dated May 29, 2020, or later EASA approved revision.

2. If the holder agrees to permit another person to use this certificate to alter a product, the holder must give the other person written evidence of that permission.

3. A copy of this certificate, issued November 29, 2021 or later FAA approved revision, must be maintained as part of the permanent records for the modified aircraft.

4. This STC is applicable to serial numbers 62.009 and subsequent (produced in Austria) and 62.C001 and subsequent (produced in Canada).

----------END---------- 3 3