What it approves
Installation of new engine baffling assembly and new oil coolers
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
Part 23 of the Federal Aviation Regulations.
Installation of new engine baffling assembly and new oil coolers in accordance with Installation Instructions listed in the AML or later FAA approved revision.
1. The installer must determine whether this design change is compatible with previously approved modifications.
2. This STC is valid only on the aircraft models listed in the AML with Lycoming O-320 series or O-360 series engines installed.
3. If the holder agrees to permit another person to use this certificate to alter a product, the holder must give the other person written evidence of that permission.
…End… This certificate and the supporting data, which is the basis for approval, shall remain in effect until surrendered, suspended, revoked or a termination date is otherwise established by the Administrator of the Federal Aviation Administration.
Rubbert Aircraft Services 1850 2nd Avenue NE Reynolds, ND 58275 1A2, A-780, A-797 Make : See attached Approved Model List (AML) No. SA03034CH for a list of approved airplane models and applicable airworthiness regulations.
Date amended : November 10, 2014
By direction of the Administrator Original Signed By:
Mike Downs
(Signature) Timothy Smyth Manager, Propulsion Branch Chicago Aircraft Certification Office
(Title)
Date of application: January 04, 2011
Date of issuance : November 17, 2011
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.
Approved models · 21
Every issue · 2
DRS keeps each issue of an STC as its own record, with its own certificate and attachments.
| Date | Status | Files |
|---|---|---|
| November 10, 2014 | Amended, current | CertificateApproved model list |
| November 17, 2011 | Issued, earlier issue | Certificate |