STC SA03053NY

Supplemental type certificate · Conair Group Inc

Holder
Conair Group Inc · Canada
Status
Current · Issued
Status date
February 6, 2012
Applied
October 31, 2011
Product
Aircraft · Small Airplane
Certification basis
Part 21, Part 23
Data sheet
TCDSA19SW

From FAA DRS, with our copy of the certificate PDF. DRS record last changed December 6, 2025.

What it approves

Installation of an Improved Firegate and Control system

What the certificate says

From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.

Part 23 of the Federal Aviation Regulations.

Original Product -- Type Certificate Number: A19SW

Make: Air Tractor

Model: AT-802, AT-802A

Installation of an Improved Firegate and Control system in accordance with Conair Master Drawing List, Number MDL-3243- 96400, Issue 4, dated September 7, 2011 and Transport Canada approved September 22, 2011 or later Transport Canada approved revision.

1. For Instructions for Continued Airworthiness refer to Conair, Maintenance Manual Supplement, document MMS 3243A, Rev. Original, dated January 24, 2011 and Transport Canada accepted September 22, 2011 or later Transport Canada accepted revision.

Conair Group Inc.

1510 Tower Street Abbotsford, British Columbia Canada, V2T 6H5 Date reissued :

(Signature) Timothy Hadsall Acting Manager New York Aircraft Certification Office

(Title) Date of application: October 31, 2011

Date of issuance: February 6, 2012

FAA Form 8110-2-1(10-69) Page 2 of 2

Number SA03053NY Date of Issuance: February 6, 2012

Limitations and Conditions: (Continued)

2. Transport Canada approved Conair Flight Manual Supplement for Air Tractor AT-802 and AT-802A Retardant Delivery System, FMS 3243A, Issue 1, Transport Canada approved September 22, 2011 or later Transport Canada approved revision is required with this installation.

3. Prior to the incorporation of this STC, the aircraft is to be configured with the computerized fire bomber gate and vent configuration per Air Tractor DWG 80540.

4. Compatibility of this design change with previously approved modifications must be determined by the installer.

5. If the holder agrees to permit another person to use this certification to alter the product, the holder shall giver the other person written evidence of that permission.

-------- END--------

ADs that name this STC · 0

An AD can apply because an STC is installed, or mention one in its text.

No AD in this release names this STC

Approved models · 2

MakeModelData sheet
Air Tractor Inc.AT-802A19SW
Air Tractor Inc.AT-802AA19SW